Launch Creader VI

WWW.OBDEXP.COM

Product Description

CReaderV is newly developed by LAUNCH, specially designed for car owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD. It not only can read/clear DTCs, but also can read live data in 2 modes, and perform many special tests. Tri-languages make it operation easily for a technician. The feature of upgrading online ensures it can test new model cars and/or functions in the future.

Product Features Fuction

1. Read Codes

2. Erase Codes

3. View Freeze Data

4. Data Stream

Entire Data list

Custom Data list

5. Special Tests

I/M Readiness
MIL Status
O2 Sensor Test
On-board monitor test
EVAP system test
Vehicle Info

6. Code Lookup

Tech Specs

Display: Backlit, 160 x 160 pixels

Operating Temperature: 0 to 60C (32 to 140 F)

Storage Temperature: -20 to 70C (-4 to 158 F)

Power: 8 to 18 Volts provided via DLC

Unit Dimensions: 126 mm×88 mm×22 mm(Length×Width×Thickness)

Test Cable length: 0.9m 

 

FAQ

Here we list some frequently asked questions and answers relating to

CReaderVI.

Question: System halts when reading data stream. What is the reason?

Answer: It may be caused by a slackened connector. Please turn off the

Creader VI, firmly connect the connector, and switch on it again.

Question: Screen of main unit flashes at engine ignition start.

Answer: Caused by electromagnetic disturbing, and this is normal

phenomenon.

Question: There is no response when communicating with on-board

computer.

Answer: Please confirm the proper voltage of power supply and check if the

throttle has been closed, the transmission is in the neutral position, and the

water is in proper temperature.

Question: Why are there so many fault codes?

Answer: Usually, it’s caused by poor connection or fault circuit grounding.
 

ALL  OUR PRODUCTS ARE FREE SHIPPING.
www.obdexp.com