Key Specifications/Special Features:

• Introduction:
  • It made according to GB4706.1-2005, GB2099.1-2008, GB/T5159.21-2006, IEC60695-10-2: 2003 and other standards
  • Ball pressure apparatus is the requirement ball (R2.5mm) and total test force 20N ± 0.2N ball pressure tester, pressure level of the state and was placed in the heating chamber on the surface of the test
  • In the test temperature specified by the after 60 +2/0min, the test quickly (<10s) immersed in 20 ± 5℃ water cooling 6 ± 2, 3min removed from the water surface within the indentation diameter measurement test, as the indentation is more than 2mm in diameter to evaluate the test specified in the heat deformation temperature
• Technical parameters:
  • Ball diameter: 5mm (R2.5mm)
  • Total test pressure: 20 ±0.2N
  • Samples bearing (Diameter): 50mm
  • Length: 100mm solid stainless steel cylinder
  • Reference: GB4706.1-2005, GB2099.1-2008, GB/T5159.21-2006 and IEC60695-10-2: 2003
  • Ball pressure apparatus takes another a hot box (oven) supporting the use