screen printing varnish H-5004

Model:	H-5004
Brand:	HS
Origin:	Made In China
Category:	Chemicals / Coatings, Varnish & Painting
Label:	water based varnish , opv , varnish
Price:	US $2400 / ton
Min. Order:	1 ton

Inquire Now

Product Description

Name: screen printing varnish

Model: H-5004

Appearance: milky white liquid,
Solid content :40%,
Viscosity (Viscosity Cups 3 , 25℃ seconds): 25 ~ 30,
Gloss: 55 ± 5

Notes:

1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7g / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 ℃.
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH ≤ 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.

Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year.