Vibration sensor switch (high sensitive) SW-18015D

Model:	SW-18015D
Brand:	BEELEE
Origin:	Made In China
Category:	Electronics & Electricity / Switch / Sensor Switch
Label:	Vibration sensor , vibration switch , Vibration detector
Price:	-
Min. Order:	1000 pc

Inquire Now

Product Description

Vibration sensor switch (high sensitive)SW-18015D

Function:

1. vibration detecting

Applications

1. Security devices

2. Toys

3. Electronic scales

Features:

1. SW-18015D seriesare spring type, no directional vibration sensor trigger switch, any angle can trigger

2. switch is open circuit OFF-state when it is static, when external force to touch and corresponding vibration, or movement speed achieve adequate (partial) centrifugal force, conductive pick feet will produce instant conductivity is instant ON-state, when external force disappear, switch back to open circuit OFF-state.

3. Switch have the identification P at the bottom, for completely airtight;

4. In the normal,switch life can reach20,0000 cycles lifespan

5. Trigger high sensitivity

6. Apply to Security devicestoysElectronic scalesproducts

Electrical characteristics:

Voltage: <12V

Current: <20mA

Conductive time: 2ms

Closed resistance: <30 ohm

Open resistance: >10M ohm

Mechanical characteristics:

Temperature range: Storage: -40°C to 80°C, Operating: -40°C to 80°C

Pull force of terminal: 300gf for 1 minute

Humidity: 95% RH, 40°C for 96 hours

Operating lifespan: 200,000 cycles

Bill of material:

Tube: ABS777D

Guide pin: brass tube, gold-plated

Spring: Stainless steel / Phosphorus copper wire

Sealing glue: Epoxy resin

Heat shrinkable tube: PET, black/gray

Welding characteristics

Solder tin, tin content 100%

Welding humidity: 260°C ±10°C

Welding time: 2-2.5 s

Do not use strong acidalkali flux

Packaging: 1000PCS /bag (PVC plastic)

Note

1. If the product used for high security products and durability of extremely high equipment (such as life safety equipment, aviation facilities, disaster prevention device), please confirm whether a share, can seek advice our company for details

2. In case of fire, Please do not overload applicable,

3. The welding temperature or time more than standard, can cause switch collapse

4. Do not use water solubility flux. May cause damage to the switch

5. Do not use solvent wash switch

6. This switch conduction rate of 98% (conductivity rate per 100 times value switch actions, can good conduction ratio)