All the LED strips produced in our company, are assembled with SMDs which of high-brightness, and together with flexible PCBs. Thus of energy-saving, high-brightness, low-fading, also easy to shear and install. Have a life expectancy up to 80,000 hours.
As a backlighting device, it is widely used in interior cove, window dressing, thin light boxes, lighting words, hotels, shopping malls and other high grade places.

Applications:
1 Decorative lighting of a room outline, furniture, garden, etc.
2 Hopping malls showcase, high-end goods display decoration.
3 Outdoor advertising and word decorative lighting.
4 The overall outline of the building decorative lighting.
5 Car decoration lighting.

Basic parameters:
1 Operating voltage: 12V DC (optional 24V).
2 Specifications: 5000*8mm, 3528 lamp beads, one meter 96 lights, 5M/Roll, 5.8 W/Meter.
3 COLOR available: Red Yellow Blue Green White Warm-white.
WATERPROOF GRADE available: Non-waterproof, Epoxy IP65, Casing, IP65, Glue IP68.
4 LED emitting angle: greater than 120 degrees.
5 Working temperature: -50-70 degree.
6 Power supply: high-quality constant voltage power supply.
7 Using the flexible PCB as the base board.
8 Warranty: 24 months.

Product Features:
1 Every three LEDs form a loop independently, so it can be cut off along the scissors-marked position WITHOUT damage to other parts.
2 Assembled with flexible PCB, easy to bend and fix along the contour surface.
3 There are 6 single color, 1 RGB and 4 waterproof grade for customers to choose, and the Size & Quantity of LED beads could also base on your requirements prior to mass production.
4 Assembled with regular-produced chip, of high brightness, low light fading, pure color, long life, also the distance among LED beads can be re-customized if you like.
5 It's great for lighting the corners of path & outline signs, illuminating advertisements, transparent or non-transparent objects.

Installation Instructions:
1 Here is a double-sided 3M strong adhesive tape affixed on back of this product, just tear off the protective film then attach it to the desired location directly.
2 The maximum number of connections for a single path driver is 2, if exceeded, please increase the number of drive circuit for power supply.
3 Calculating the power for design and distribution scheme: Total power comsuption = (Power of a single LED strip) X (Number of LED strips desired). (it is recommended that a margin be left for power matching, using 80% of the rated power)

Installation Notes:
1 Note that the output DC voltage should be same as the rated voltage of the strip light, do NOT use AC 220/110V lighting the stip directly.
2 To ensure that the light bar installed with reliability, it is best to fix it using the special 3M glue.
3 Please shear at the scissors-marked position, for outdoor installation, it is necessary that take a waterproof method on the connection position.
4 Do not excessively bend or pull the strip, the minimum angle while bending, please do not less than 10 degrees.
5 This product, 24V can cut every six lights, 12V, three lights.
6 To be installed in an anti-static environment, the proposed operator to wear a static ring.

REMARKS:
1) Price comes higher as the Waterproof Grade goes up.
2) Price may come lower or higher as the cumstomer's requirement varies, of course the technics & material also vary.

Hytours Lee
goodledsupplier at gmail com
Shenzhen ART Lighting Co., Ltd.
Remember: we only produce LED STRIP.
Our purpose is: NOT ONLY LED STRIP, BUT LED STRIP OF ART.