Thickness: 0.12mm

[ Characteristics ]

And the whole film is affixed: without splicing, no seams, no trace, with air guiding, don't have to worry about bubbles, ensure the vehicle surface integrity;

Thin film, robust: thickness of thin, flexible, malleable stronger ( heating any tension, reply after normothermic stereotypes not contraction), in a smaller arc surface exhibiting a desired winding resistance, contact force are more durable;

And durable: excellent environmental tolerance, not yellow, service life of up to 4 years;

Crystal: unique, lasting credit credit antireflective coating, natural, durable, and the original car com., completely split car paint texture;

Van isolated corrosion: can resist most petroleum, oil, fuel, fatty acid, solvent, weak base, weak acid salt, completely isolated, gravel, grease and other persistent injury guano;

, wear-resisting resistance: Super toughness restoring force increases more than 10 times, automatic bridging fine scratches, excellent defense against the general scratches, friction and wear;

Excellence: refraction filter, filter of harmful light, glare, barrier UV on paint damage, protect the original paint gloss and durability;

, fire-retardant insulation: adapt to temperature of - 40 C to +90 C, has good heat insulation and inert guide temperature function, fire retardant;

John: jointed tightly without wrinkles, no bubbles, no cracking, no;

And maintenance convenient: car washing waxing labor hours and cost reduction;

And no residue : an easy one, easily removed, not to hurt the paint, no residual, reaching beyond the imagination of the amazing results;

Super environmental protection : no paint, human and natural produced no toxic pollution.

[ usage ]

[ ] dry paste method

Automobile, motorcycle or a small cart

The use of tools: a clean rag, scraping or credit card

1, clean the body paste position, conditional can use without fiber cloth dipped in50% alcohol or isopropyl alcohol or acetone to scrub, can also be used soap and water; the solvent cleaning surface to be completely volatile solvent available at the rear paste.

2, in general, the side of the stick slowly, side by side, bottom tearing paper scraping tool.

3, if the car width is less than 10 cm, can put stickers all torn paste. But be careful, don't fall accident ground adhesion or sticking dust.

In 4, with a clean cloth or scraping [such as calling card or credit card ] in the film repeatedly forced oblique wiping or scraping a few, until there is no bubble car stickers.

Recommendations for 24hours not exposure or car wash.

[ ] wet sticking method

Auto or large vehicles (proposed double operation )

The use of tools: watering can, clean cloth, scraper, knife, hairdryer

In 1, will need to paste surface is cleaned in preparation for pasting paper before the glass water spray on the surface to paste ( clean body, to be affixed to the body parts with the sprayer spray water ) -- mainly is used to reduce the viscosity, convenient to adjust the position of sticker.

2, determine the need to place, together with the car from right to left to [ or from to below] raising side and rag press affixed to the car, then the side of the stick, side by side, bottom tearing paper cloth flattening.

In 3, meet the door handle or collision shall according to the material cut into or carrying out and.

4, timely adjust, graphical location identified as correct, scraper repeated scrape water and bubble, the use of scraper on oblique blow from right to left.

In5, the doors and seam with a knife cut inward equipartition, wrapped.

6, try to make the car in the water dried, the conditions can be hairdryer moderate heating drying.

S estions:24 hours so as not to exposure, within 48 hours of not washing.

A modified color film, what are the advantages? We choose the vehicle to change the color of car paint film. In 1, the ductility is good, can be in continuous variation on the surface of the well to the complete package, such as common rear-view mirror and rear bumper corner hyperboloid section, the continuous change of the surface portion of front bumper.

In 2, our good quality, can be easily and quickly paste or removed. Can firmly film paste in the car (corner is no exception ), can be removed without leaving residue.

In 3, the product belongs to the synthesis of polymeric PVC films, the molecular structure is very stable, non-toxic, durable, heat resistance, corrosion resistance, resistance to harsh conditions on the paint damage.

4, color is rich and varied colors, there are various colors to choose from; color of stability in different years, different batches, the product color does not exist.

Two, change the color film has the advantages? Raise the vehicle cleansing effect, dark colored metal texture is very outstanding, make vehicles more sporty, lifting the vehicle the appearance grade. Matt film is flat, no matte paint that tiny bump, is not easy to be stained with dust, easy to clean. Than matt paint durable long time. Paste the sub-gloss membrane relative spraying matt paint has the advantages of simple operation, because the spraying matt paint on the original car paint surface treatment technology demand is very high, it is difficult to achieve the standard general technician. Matt film does not need polishing, waxing, you can save a lot of cost.

Three, change color film toxic? The product belongs to the high molecular type PVC membrane, the molecular structure is very stable. In line with EU environmental standards. On the paint, and no toxic side-effect.

Four, change color film of cold resistant, heat degree? Membrane affixed to the surface of the body, can withstand the daily running under the conditions of high temperature. High temperature resistant to90 degrees centigrade. High temperatures of - 50degrees temperature. The market of College

Industry Sticker Car membrane at low temperatures will be decreased adhesion, crisp, easy to crack problems.

In five, rain erosion, UV, chemical liquid, the winter snow melt agent or tree oil, shellac can on membrane damage? The product belongs to the high molecular type PVC membrane, the molecular structure is very stable. Membrane tolerance and paint are similar, as long as it is normal paint can tolerate violations are not on membrane damage ring.

Six, what is the film 's memory ability? Is the important core quality of film. Film heating can be quickly restored after the initial state, the surface conversion to produce wavy wrinkled continues after construction. Paste in the body after the film is memory, a new shape, the heat will be tightly wrapped body, to the side seam of the wrapped tight, many years will not crack. In use, when a small scratches, after sun exposure, will disappear by memory capacity for smooth state.

In seven, and the bus sticker advertising film, car Qimian protective film and other similar film what is the difference? A special Sticker Car disadvantages:1, would be slightly longer time side;2, Beijiao paste strength is not enough;3, poor ductility, can only be attached to the plane, surface and corner post not;4, poor protection effect;5, not durable, easy to fade;5, off there will be residual effect of glue, paint gloss;6, color color color;7, poor results;8, at low temperatures will be decreased adhesion, crisp, easy to crack problems!

A modified color film, what are the advantages? We choose the vehicle to change the color of car paint film. In 1, the ductility is good, can be in continuous variation on the surface of the well to the complete package, such as common rear-view mirror and rear bumper corner hyperboloid section, the continuous change of the surface portion of front bumper.

In 2, our good quality, can be easily and quickly paste or removed. Can firmly film paste in the car (corner is no exception ), can be removed without leaving residue.

In 3, the product belongs to the synthesis of polymeric PVC films, the molecular structure is very stable, non-toxic, durable, heat resistance, corrosion resistance, resistance to harsh conditions on the paint damage.

4, color is rich and varied colors, there are various colors to choose from; color of stability in different years, different batches, the product color does not exist.

Two, change the color film has the advantages? Raise the vehicle cleansing effect, dark colored metal texture is very outstanding, make vehicles more sporty, lifting the vehicle the appearance grade. Matt film is flat, no matte paint that tiny bump, is not easy to be stained with dust, easy to clean. Than matt paint durable long time. Paste the sub-gloss membrane relative spraying matt paint has the advantages of simple operation, because the spraying matt paint on the original car paint surface treatment technology demand is very high, it is difficult to achieve the standard general technician. Matt film does not need polishing, waxing, you can save a lot of cost.

Three, change color film toxic? The product belongs to the high molecular type PVC membrane, the molecular structure is very stable. In line with EU environmental standards. On the paint, and no toxic side-effect.

Four, change color film of cold resistant, heat degree? Membrane affixed to the surface of the body, can withstand the daily running under the conditions of high temperature. High temperature resistant to90 degrees centigrade. High temperatures of - 50degrees temperature. The market of College

Industry Sticker Car membrane at low temperatures will be decreased adhesion, crisp, easy to crack problems.

In five, rain erosion, UV, chemical liquid, the winter snow melt agent or tree oil, shellac can on membrane damage? The product belongs to the high molecular type PVC membrane, the molecular structure is very stable. Membrane tolerance and paint are similar, as long as it is normal paint can tolerate violations are not on membrane damage ring.

Six, what is the film 's memory ability? Is the important core quality of film. Film heating can be quickly restored after the initial state, the surface conversion to produce wavy wrinkled continues after construction. Paste in the body after the film is memory, a new shape, the heat will be tightly wrapped body, to the side seam of the wrapped tight, many years will not crack. In use, when a small scratches, after sun exposure, will disappear by memory capacity for smooth state.

In seven, and the bus sticker advertising film, car Qimian protective film and other similar film what is the difference? A special Sticker Car disadvantages:1, would be slightly longer time side;2, Beijiao paste strength is not enough;3, poor ductility, can only be attached to the plane, surface and corner post not;4, poor protection effect;5, not durable, easy to fade;5, off there will be residual effect of glue, paint gloss;6, color color color;7, poor results;8, at low temperatures will be decreased adhesion, crisp, easy to crack problems!