This machine adopts electrical & electronic synchronous control technique both separate-phase welding and welding time is composed of digital and integrated electric circuit. This opeartion is accurate,it has stable function ,firm welded point and without welded tracks.

2.The cross and line wires are fed from coils.

3.This machine is equipped with precise equipment for weft cutting (that won the nation patent ZL2208722.2)and position (that won the nation patent AL02208721.4),so the length of wefts is identical and regular,it is unnecessary to slice the side.

4.Mesh pulling system adopts elastic tension link(that won the nation patent ZL200520024380.9)and opening positioning mesh,it is easy to regulate the mesh hole and mesh opening size is rather accurate,welding aperture could adjust randomly with range. Not only welding speed is fast but also it is easy to learn and operate.Only two men can finish the operation.

5.The finished products can be in coil or in panel.

The main technical parameters

 

Wire dimater	1.4-2.3mm	Line wire feed	continuous
Cross wire space	50-200mm	Cross wire feed	continuous
Line wire space	50-200mm	Rated voltage	380V
Width of mesh	1200mm	Rated electrical power	36KVA×2
Welding speed	50times/min	Overall dimension	2.5 X 2.5 X 1.5M
Number of warp	25	Machine weight	2800KGS

 

Application

1.mesh fence、casting roof mesh in the building

2.Construction ( 3d panel covered mesh, floor warmness preserving mesh, seedbed mesh, floor room mesh,animal cages)