Printing silicone rubber

Model:	SY-901040
Brand:	lianhuan silicone rubber
Origin:	Made In China
Category:	Chemicals / Rubber Materials
Label:	Custom Logo Printing , silicone ink 901040 , Centrum shape silico
Price:	¥80 / kg
Min. Order:	5 kg

Inquire Now

Product Description

Silicone ink for Application:

printing most natural and synthetic fabrics, strong adhesive with silicone rubber products, including elastic fabrics for garments, Jerseys, Hats & caps, swim caps, Sweaters, Jackets, Gloves, Sleepwear, Pants & shorts, Bathing

Silicone ink for Characteristic:

Easy and simply operation 10A:1B with normal printing process

Catalyzed by platinum, no toxicity and non-corrosiveness

No solvent or cured by products

Non pollution environment, environment friendly silicone ink,

Non harm to human body. Caused by the organic solvent into environment friendly, in noxious ink

None cause environmental problems when test and destroy ester of silicone ink.

Silicon Ink with SGS approval, the silicone ink based on safety design easily pass any international inspection

Cured silicone in with high elastic, soft smooth hand feeling when touch, slippery, high stretchable and non bleeding

adhered on textile fiber well after being cured and forms elastomeric of silicone.

Good ink for silicone rubber products and latex with great adhesive.

Produce high tear strength, create high quality printing effect.

Moderate fluidity and cure time application. Easy process

Low and higher temperature resistance (-50 to 300)

Special silicone elastomeric recovery capacity, flexibility, velvet, resistance to oil, solvent, and other etc,

no harm to human body caused by the organic solvent into environment friendly, in noxious ink

Prepare methods:

1. Mixed Color master batch: Using it when needing various colors. Adding 0.2% of total amount material.

2. Mixed 10% cattily yet curing agent into small amount of silicone ink(90%).

3. The curing agent should be mixed very well. Otherwise, some parts won’t be cured.

4. Could used thinner for decrease the viscosity. Over 15% of thinner. The abrasiveness, durability and adhesion force will be reducing. There tested before production is required.

The Properties of the products:

style	901040	903540
Appearance	Translucent	Translucent
Viscosity(cps)	100.000	350.000
Hardness(Shore A)	38	35
Pull strength(kg/cm)	30	30
Elongation (%)	550	300

Drying methods

1. According to different thickness of silicone ink, the curing time is different. Normal situation for mixing Part A: Part B =10:1 curing time is 50seconds with the temperature of 150 Centigrade (poly addition process).

2. When the room temperature is above 25 Centigrade (humidity 50%), room temperature cure can be carried out under summer condition

3. Color master batch: Using it when needing various colors.

The curing time by using Screen mesh

The general proportion of silicone gel and curing agent is 10：1 and reaction as follow:

The ink will be cured at 2 Min.30 Sec. at temper adventure 100 (by 90 meshes)

The ink will be cured at 1 Min.30 Sec. at temper adventure 120 (by 90 meshes)

The ink will be cured at 50 Sec. at temper adventure 150 (by 90 meshes)

The ink will be cured at 2 Min at temper adventure 100 (by 150 meshes)

The ink will be cured at 1 Minuses at temper adventure 120 (by 150 meshes)

The ink will be cured at 40 Sec at temper adventure 150 (by 150 meshes)

We can provide you the best quality rtv silicone rubber with competitive price and free remold technology.

Any more information, please feel free to contact Miss Ana Liu