QCX5(MS-K) Series Magnetic Starter 

Application

The starter is with the application of 50Hz or 60Hz AC voltage to 660V,current to 95A,The following circuit asthe contro l of three-phase squirrel cage,to Start,stop and reverse starting the moter.Which is with the smallvolume,installation convenience features.It has lost pressure and overload protection performance.

The starter applied to the environment under normal use(with out explosion-proof,anti-corrosion).Theproducts have many kind of with buttons,button-sealed Circle and without button,etc.It is apply to hot andhumid area.Tec-hnical data:a model by loading products,specifications,capacity control.

The normal working and installment conditions

1,Surrounding air temperatures:The surrounding air temperature upper limit does not surpass +40°C,the lower limit is not lower than-5°C,The average temperature does not surpass +35°C in 24 hours.
2,Instllation sites altitude above sea level does not surpass 2000m.
3,Atmospheric relative temperatures does not surpass 50% when the surrounding air temperature are 40°C,Can not have a higher relative humidity in a lower temperature,In the wettest month monthly average most low tem perature is +25°C,the monthly average maximum relative is 90%.and consideration the dew on product surface.Because of the temperature change
4,tnstallation sites environmental pollution can be 3 levels.
5,Install category is III kind.
6,Install condition:A.Installment gradient with vertical not to surpass 5° B.Installs in without remarkable\vibration and impact place.

Specification

1,L1.L2.L3:Three-phase power input
2,T1,T2,T3:The three-phase power outputs contact the motor
3,In the dashed line is the compressor equipment
4,P:The pressure transmitter"the user supplise for oneself"
5,P1,P2:The pressure transmitter(P)"is the same as 00-097.98 indireatly connecting
6,S:Locking push button