Silicone Thermostat Switch with Temperature Sensor for Heated Gloves

OEM & ODM service is available

Feature:

(1) With temperature sensor which can sense target heating area's temperaure(we can set temperature value in each setting per customer's requirement)

(2) 5v ~18v working voltage

(3) 0A~3A working current (0A~5A is optional)

(4) Water-proof & washable

Application:

This is a thermostat controller/ silicone LED switch button for heated jacket/ heated vest/ heated gloves/ heated belts/ heated shoes/ heated seat cushions etc., which can power on/ change temperature setting/ power off.

Specification:
1. Model: L X-TPC01
2. Input Voltage: 5-18V
3. Output current: 0-3A (0-5A is optional)
4. Operating Efficiency: ≥99%
5. Standby Current: ≤300μA
6. PCB Internal Impedance: <20mΩ
7. Work Temperature: -20℃~ +60℃
8. Three temperature adjustable: red-high, green-medimum, white-low.
 
Working procedure:
(With loading & connect to battery pack)
1. when connect to loading, LED will blink red-green-white:
      if temp. sensor can not detect loading or be damaged, LED will blink green to alarm;
      if temp. sensor work well, LED light will go off
2. long pressing button for 2 seconds to turn power on, LED ligh in red
3. short press button to change temperature settings:
    red-high, green-medimum, white-low;    
    if temperature in one setting rise higher than setted value, it will shut off automatically; after temperature go down within setted value it will turn up automatically
4. long pressing button for 2 seconds to turn power off.

Any question or requirement, pls feel free to contact us.