^{Complete set of Particle board machinery with various kinds of capacity.}

^{Particle board is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and}

^{hot press section. Finished boards can be used for furniture, building, packing, vehicle and  decoration and lamination.}

 ^{1. Chip preparation section
      Raw material is reduced into qualified chips by the drum chipper,  then the chips are transported to the chip bin, and then feed to the  knife-ring flaker by}

^{which the chips are turned to flakes, then the  flake stored in wet flake bin.}

 ^{2. Drying and sifting section
     The flakes discharged from the wet flake bin are conveyed to the rotary dryer. Qualified core flakes are stored in core flake bin; oversize flakes are send to}

^{mill to be re-crushing, and transported to surface flake bin.}

^{3. Glue regulating and applying section
      After scaled, the core and surface flakes are to be effectively  and uniformly mixed with qualified glue independently in their glue mixers respectively.}

^{4. Forming and hot-pressing section
     The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press,}

^{lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press.}

^{Rough boards after pressing are pushed to unloader via pallet.} 

 ^{5.Cooling and sizing section
     The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become  a qualified particle-board, stacked}

^{on the hydraulic lift.}

 ^{6. Sanding Section
      The board are sanded, checked and stored .
      PLC control is used in mat-forming section.}