The RS9110-N-11-24-(xx) module from Redpine's Connect-io-n™ family of products is a complete IEEE 802.11bgn based wireless device server that directly provides a wireless interface to any equipment with a serial or SPI interface for data transfer. It integrates a MAC, baseband processor, RF transceiver with power amplifier; and all WLAN protocol functionality, networking stack in embedded firmware to make an 802.11n WLAN solution for a variety of applications. No WLAN or networking functionality is required on the host system or data source.

Features

Compliant to 802.11b/g and single stream 802.11n

Self-contained serial-to-wireless functionality - does not require any host processor bandwidth

WPA/WPA2-PSK, WEP modes of security

Host interfaces: UART and SPI

Integrated TCP/IP stack with option to bypass in SPI modules through software configuration

Configuration through AT commands and SPI frames

Ultra low power operation with power save modes

Ad-hoc and infrastructure modes for maximum deployment flexibility.

Single supply 3.1 to 3.6 V operation

Certification : Module is based on RS9110-N11-02 which is certified by FCC, IC and CE.

Specifications

Network Standard Support IEEE 802.11b/g/n

Data Rates802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps802.11b: 1, 2, 5.5, 11 Mbps

Frequency Band2.412 - 2.484 GHz

Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, and 64-QAM 802.11b with CCK and DSSS

Wireless Security802.11i: AES,WPA, and WPA2

Host Interfaces SPI, UART

Network Protocols TCP, UDP, IPv4, ARP, ICMP, DHCP Client

WLAN Functions Power save modes, automatic roaming, Ad-hoc and Infrastructure modes

Supported UART baud rates Supports standard baud rates from 9600bps to 3.6Mbps

Configuration AT commands (for UART)

Operating Temperature Industrial Grade -40ºC to +85ºC

Supply Voltage3.1 - 3.6 V

Dimensions13.7 mm x 12.9 mm