It is used on all kinds of offset machine. With the ink, first print image on paper, then transfer the image onto various materials by heat transfer press, especially for polyester fabric. Under high temperature, the ink will become gas and go into fabric. It belongs to gas shading.
 

 

1.    Use scope: Apply to single-color, two-color and multi-color offset printing machine which supply single paper once. Available paper is chrome paper, coated paper, offset paper, and cardboard. Transferred materials can be fabric, cotton, mug, metal, wood, ceramic and etc. Fabric can be transferred directly, other materials need sublimation coating.
 

 

2.    Model & Color: FO-SA Magenta\Yellow\Cyan\Black

       The model is suitable for offset machine with less than 8000r/h.
 

 

3.    Product Feature: Super Anti-crust.

 

4.    Use Method: In normal condition, use the ink on press directly. The chemical for normal offset printing also can be available, to adjust the ink attribution.

 

5.    Attention: The color on paper and the color on fabric are different. Because sublimation ink belongs to gas shading, so the CMYK ratio when making PS plate is different from normal offset plate-making.

For example:

(1) If want to get 50% C on fabric, the color on paper should be 30% C;

(2) If make red PS-plate, the proportion is 100% magenta and 35%-40% yellow;

(3) If make blue PS-plate, the proportion is 100% cyan and 20% magenta;

(4) If make green PS-plate, the proportion is 80% cyan and 90% yellow;

(5) If make yellow like Asian skin PS-plate, the proportion is 10-12% magenta and 7-8% yellow and a little cyan.

 

6. Transfer printing parameters:

For alumina plate, stainless steel plate, copper plate and porcelain with coating, the transfer temperature can refer to the above table.
 

 

7. Dye degree: