Explanation:

  OAK DK610 conductive oil, by senior compounds and the heat stable synthetic oil made from, with liquidity, can rapidly in the switch and electrical equipment in the contact form on the surface oxidation resistance, high lubrication, the high adhesion of the oil film, ensure the normal power cycle and service life of the metal surface in contact.

Application:

  OAK DK610 conductive oil used in electric current flows through a metal surface, have arcing, prevent sparks produced, anti-oxidation, increases the conductive area and conductive effect, reduce carbon produce functions.

·All kinds of micro switch of the electricity system contacts

·Metal smelting, chemical electrolysis, electroplating, etc industries

·Power transmission and transformation of isolating switch, electrified lines

·Silver welding seam bearing shaft location of electric conductive and interface of conductive, lubrication, wear resistance

Advantages:

    OAK DK610 conductive anointed with:

·Comply with European Union ROHS the REACH regulation

·Reduce wear and wastage, effectively reduce the sparks occurs, good arcing effect

·Prolong the service life of the product, guarantee the stability of the product use and energy efficiency sex

·Strong oxidation stability, prevent metal surface oxidation and corrosion

·Resistance is extremely low, do not affect a small current through the

·Can effectively improve and increase the area of conductive metal, which greatly improve conductive effect, to reduce the occurrence of short circuit

·And most of the plastic compatibility

Approval:

  OAK DK610 conductive oil has been isolating switch, metallurgy, chemical, electric circuit, electrolysis electroplating production line, which electricity guide rail, skiing, the metal wire interface potentiometer, many OEM producers such as relays of recognition, recommend and extensive testing.

performance

Testing principle

DK610

NLG1 level

00

color

ASTM  D 1500

light yellow

Density 20℃

DIN

51 757

0.9  g/ml

Thickener type

Inorganic

Base oil

Synthetic oil

Viscosity index

ASTM D 2270

208

Flash point℃

ASTM D 92

226

Pour point℃

DIN ISO 3016

-237

Temperature range℃

-40～203

Copper corrosion

1a

Oxidation stability100h/100℃

( ASTM D 942 )

biggest0.75kg/cm2

Evaporation loss weight22h/100℃

( ASTM D 972 )

DIN51581

9.2 wt%

And value

DIN

51 809

0.05mg KOH/g

resistivity

3.75*1010Ohm*cm