LED digital smart panel power meter
| Model: | MPM8000S |
|---|---|
| Brand: | Hyes |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Electronic Measurment Apparatus |
| Label: | power analyzer , digital power meter , multifunction meter |
| Price: |
-
|
| Min. Order: | 10 pc |
Product Description
MPM8000S is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000S can measure and analyze power parameters, such asU, I, In,F, S, P, Q, PF, kWh, kvarh etc. MPM8000S has the following functions: RS-485 communication port (MODBUS Protocol),Max/min data record, analog output, digital signal input, and multi-tariff function etc.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001.
Measured scope
Measured scope
The meter can be applied in secondary measure in high and low voltage electrical system.The measured data can be communication transmitted.It can achieve the function of meansureing and anylzing parameters for single phase, 3-Ph 3wire and 3-Ph 4Wire system (include unbalance load).
Measured accuracy
Measured accuracy
|
Parameters
|
Display
|
Direction
|
Accuracy
|
|
Voltage
|
0~9999kV
|
|
Class 0.2 scope:5%~100%V
|
|
Current
|
0~9999kA
|
|
Class 0.2 scope: 5%~100%A
|
|
Zero sequence current class 0.5
|
|||
|
Power factor
|
-1~+1
|
Directional
|
Class 1
|
|
Frequency
|
45~65Hz
|
|
±0.01Hz
|
|
Active Power
|
-9999~9999MW
|
Directional
|
Class 0.5
|
|
Reactive Power
|
-9999~9999Mvar
|
Directional
|
Class 0.5
|
|
Apparent Power
|
0~9999MVA
|
|
Class 0.5
|
|
Active Demand
|
-9999~9999MW
|
|
Class 1.0
|
|
Reactive Demand
|
-9999~9999Mvar
|
|
Class 1.0
|
|
Active Energy
|
0~9999999.99Mwh
|
Directional
|
Class 1.0
|
|
Reactive Energy
|
0~9999999.99Mvarh
|
Directional
|
Class 2.0
|
|
Parameter
|
Scope
|
Remark
|
|
Meter address
|
1-247
|
|
|
PT
|
1.00-99.00 and 100.0-6500.0
|
|
|
CT
|
1.0-6500.0
|
|
|
RS485 baudrate
|
2400/4800/9600/19200/38400
|
bps
|
|
Current / voltage measured scope
|
(0-5)A / (0-400) (L-N)V
|
|
|
Wire connection
|
3P3L,3P4L,1P2L, 3P3B,3P4B
|
|
|
Digital signal input
|
1 Channel
|
|
|
Pulse Energy Constant
|
1-9600
|
|
|
Pulse width
|
20-100
|
ms
|
|
Analog output corresponding
|
(4-20)mA or (0-5)V
|
|
|
Multi-tariff rate
|
2-12 phase/ alternation time is multiply by 30 minutes;four types of multi-tariff rate as sharp,peak,flat,valley
|
|
|
Input Current
|
||||
|
Current input:5A
Measured scope:0.5%~120% In
Overload: 2 X rated continuously, 100A/1s non continuously
Measured power consumption: ≤ 0.2 VA per phase
|
||||
|
Voltage Input
|
||||
|
Voltgae input:400VAC(phase voltage),693VAC(wire voltage)
Allowed frequency scope: 45~65Hz
Measurement Scope:3%~120%
Overload: 2 X rated continuously, 2500V/1s non continuously
Power consumption: ≤ 0.5VA per phase
|
||||
|
Remote input(optional)
|
||||
|
input channel:
|
1channel
|
|||
|
input mode:
|
Dry contact
|
|||
|
Analog output(optional)
|
||||
|
Output channel
|
1 channel programmble
|
|||
|
output signal
|
4~20mA or 0~5V(optional)
|
|||
|
Response time
|
≤400ms
|
|||
|
Output wave
|
≤18mV(sharp-sharp value)
|
|||
|
load capitity
|
≤500Ω(4~20mA) or ≥250Ω(0~5V)
|
|||
|
Pulse output(standard)
|
||||
|
No. of outputs
|
2 channels (active/reactive energy each without power)
|
|||
|
Output type
|
Reactive pulse output
|
|||
|
Pulse Energy Constant
|
1 ~ 9600
|
|||
|
Pulse width
|
(20 ~ 100)ms
|
|||
|
Serial com. port(optional)
|
||||
|
NO. of outputs
|
1 RS-485 port
|
|||
|
Communication protocol
|
Modbus-RTU protocol
|
|||
|
Baud rate
|
2400, 4800, 9600, 19200, 38400 bps
|
|||
|
Multi-tariff rate (optional)
|
||||
|
No. of time phase
|
2 - 12 phase
|
|||
|
alternate time
|
a multiply of 30 minutes
|
|||
|
multi-tariff type
|
sharp,peak,flat,valley
|
|||
|
time pahse
|
2 - 12 phase
|
|||
|
Other parameters
|
||||
|
Auxiliary power
|
85~265VAC/DC (30VDC is optional; 23 is “+" terminal and 24 is “-" terminal when use DC.)
|
|||
|
Display type
|
LED display
|
|||
|
Operation type
|
Key or software operation
|
|||
|
Temp. drifting factor
Withstand Voltage (Input against input)
Withstand Voltage (Input against output)
Withstand Voltage (Remote input against output)
Total power consumption
Operation temperature
Storage temperature
Operation humidity
Pollution Class
Material of Housing
Protection Class Temp.
|
<100PPM/℃
2500V/1 min
2500V/1 min
1500V/1 min
<5VA
-20℃~60℃
<</diyep:docbody> |
|||
Member Information
| Shenzhen Huayansheng Electron Limited Company | |
|---|---|
| Country/Region: | Guang Dong - China |
| Business Nature: | Manufacturer |
| Phone: | 13972705652 |
| Contact: | Linda (Sales Manager) |
| Last Online: | 12 Nov, 2012 |
