1. it is suitable for stylus pro 9860/9906D(6color)

2.Cartridge model 's details information are as follows: 
  T6701 Black    T9 Light Black
   T6702 Cyan 
   T6703  VIVID Magenta  
   T6704 Yellow     
   T6705   Light Cyan
   T6706  VIVID Light Magenta 
 
3.Our refill cartridge has simulator  inductor  on it.You can use our QE-788 chip resetter to reset it.
4.Install instrution:
(1)Taking the original cartridge out off the printer
(2)take out the original chip off the  original cartridge,then install it to our refill cartridge
(3)Finaly,puting our refill cartridge into the printer.

Note:
1)There haa sensor on the  refill ink cartridge,you just need  take out the original chip off the original cartridge ,then install it into our refill ink cartridge.Finally,used QE-788chip resetter to reset it.It will be ok.
2)The best way to reset it that you should reset it before the ink shows "15%". You should be often check if the cartridge has ink or not.
3) When you reset the ink,the best way is refilled to 80% .
4)Do not open the rubber plug for filling ink when the printer  turn on.And you also should not turn open the rubber  at once when the printer just turn off .You should wait for a moment.If not,the ink may be spout .  
5)If you want to take out the refillable cartridge,you should be let the cartridge's air out ,the instruction is that remove the rubber which is in the cartridge's air hole . You should be more and more slowly take out the rubber ,if not,the ink will be spurt out.