Horizontal band saw machine HD400X200 Bandsaw
Forefront of composite floor surface processing equipment, precision, speed, ultra-thin cutting. The main features
Humane microcomputer user interface, simple and convenient operation.
High-precision rotary encoder with a precision ball screw to control the cutting thickness, greater accuracy.
Assisted back to the feeding system, saving material, effort, time-saving.
Sawing pattern is smooth without planing, PLC integrated control system, safe and reliable.
Hydraulic saw blade tension automatic compensation system to ensure that the saw blade always in the best tension status, extension status, extend saw blade life.
The conveyor hydraulic motor drive, and run a smooth, constant, for power transmission to ensure smooth.
Specially designed clamping device, ensure that the wood sawing can be reliably pressed, to ensure safe operation.
The thickness tolerance of plus or minus 10 wire, the cutting surface will not produce the the sawn road loss of the joint gap was only 1.4-1.6mm compared to other processing methods can save about 20% of the material, to substantially reduce the cost.

HD400X200 parameters
Largest processing size (width x thickness) of 400 x200mm
Conveyor belt width of 380mm
Cutting wheel diameter of 711mm
Feed speed 0-20m/min
Cutting wheel motor Motor power 18.5kw
Hydraulic pressure 55kg/cm ²
Vacuum tube diameter 102mmX2
Band dimensions (L x W x D) 4 572 x27 x 0.9mm
Dimensions (L x W x D) 3000 x 1950 x 1850mm
Saw Lu 1.4-1.8mm
Net weight 1900kg