Flap barrier turnstile gate specification
|
| Contains: |
Mechanism, Housing, Driver board, Power supply |
| Housing Material: |
304 stainless steel or Cold-rolled steel plate. |
| Drive mode: |
Motor drive, 6 sets Photoelectric sensor |
| Access modes: |
1. Locked. |
| 2. Remote control by computer. |
| 3. Authorized. |
| Following Speed: |
35 people/minute in Normal close mode. |
| 60 people/minute in Normal open mode. |
| Noise: |
≤ 65dB |
| Lane width: |
600mm |
| Working state: |
Single or bi-direction, 16modes. |
| Status Indication: |
Allow passing through / Forbidden |
| Voltage: |
Input AC220V (adjustable) |
| Power: |
1. Paused: < 50 Watt |
| 2. Working state: < 150 Watt |
| Communication Interface: |
One RS232 interface |
| Two Card reader signals (Passive) |
| One Fire Alarm interface |
| Working environment: |
Indoor, Matching with rain frame for outdoor use. |
| Working temperature: |
00C-600C |
| Humidity: |
5%-90% |
| Maintenance port: |
2units |
| Service Life: |
Three million contiguous opening and closing of barrier panel. |
| Dimension: |
1880x320x1040(mm) |
| Net Weight: |
80KG |
