Items	Specification
Pipe Diameter	Ф6～Ф60mm
Wall thickness	0.3～1.0mm
Number of pipes	1，2，4，6，8pipes
Straight tolerance	≤2‰
Pipe end deformation rate	＜5%
Length alignment	≤0.5mm（L=1000）
Deformation rate of pipe	≤3%
Length detection	Rotary encoder
Way of pull apart	Horizontal
Way of cutting	Sawing blade, rotated blade
Feeding speed	10s/1000mm;15s/3000mm;20s/12000mm
Straightening degree	5mm/1000mm (depending on the hardness of material)
Cutting speed
Power supply	3P and 4 wire 80V±10%
Power	7kw
Air pressure	0.4～0.6Mpa
Remarks: Special technical data according to contract.

Feeding, roller straighten, coder setting length, rotated blade pre-cutting, pneumatic mold pull apart can be finished in one time. It is equipped with a special device to cut off so that the forming end is trim, bur-free, and chipless.