Legally certified explosion proof/dust ignition proof by a
recognized testing laboratory
Less than 10 Ohms of resistivity
Coalescing Filter Element (CFE) for moisture removal
HEPA Filter - Optional with an efficiency of 99.995% on 0.3
micron. Tested: IEST RP-CC001.3. H14 by MPPS method as
per EN 1822.
Designed for the recovery and neutralization of conductive
and explosive dust into a liquid immersion bath
Optional Conversion Kit for Wet & Dry Recovery available
Continuous duty single or 3-phase explosion proof/dust
ignition proof motor
Stainless steel SAE 304 Interceptor tank
Recovery capacity of 1 gallon (4 liters) of dust into 5
gallons (20 liters) of liquid
Equipped with a heavy duty powder coated Hydraulic Cart
for easy emptying of recovered materials
Group E Motor (Metal Dust) included
Other motor performances available

Stainless steel Interceptor tank and powder coated Hydraulic Cart. Less than 10 Ohms of resistivity. This
unit is equipped with a Coalescing Filter Element (CFE) for moisture removal. An optional true HEPA Filter
(H14) is also available. This unit has been designed for the recovery of metallic, conductive and
explosive dusts into an immersion liquid bath such as water, parafiin oil, mineral oil, etc. This unit
renders any hazardous dust inert. This unit can be converted for the recovery of fuel, solvents and
acids. The heavy duty powder coated Hydraulic Cart allows for the unit to be lifted up to 36" (91 cm)
above the ground so that contents can be emptied into a recovery container for disposal.