Metal 3d carbon fiber vinyl film car sticker adhesive

Size:1.52*30m/roll

Thickness: PVC:0.12mm,adhesive:0.03mm

Release Paper:140g

 

Details:

1.has a look and fell similar to carbon fiber bonnet and hard-top

2.can be applied on interior and exterior surfaces of a car(hoods,trunks,side view mirrors etc.

3.can be applied easily on all the common car paints

4.cost-effective

5.without residual glue on the car after remove

7.face film:pvc 0.12mm  adhesive 0.03mm,release paper:140g

8.backside with air drain,air free bubbles,without air bubbles

9.color:red,yellow,blue,green,black,white,pearl and metallic etc.

10.adhesive backing with air release technology for a bubble free installation

 

Metal 3D carbon fiber vinyl film is not just a cheap imitation vinyl,it is a high quality three-demensional textured vinyl that reflects light the same way real carbon fiber parts do.It has a self-adhesive back and will stick to pretty much any surface,but also can be removed and re-applied numerous times without losing its adhesion.Metal 3D carbon fiber viny film is also water resistant and UV stable,so applying it to exterior surfaces such as a hood,spoiler,or the whole car is not an issue.

 

Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.

Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles.

Using a soft rubber squeegee will help smooth out bubbles and wrinkles

 

Carbon fiber modification on engine hood,empennage,surrounding surface,car handle,rotary plate,etc.it's the desire of car fans.Car fans are bothered by this problem any more after the carbon fiber vinyl come at out as its price is lower and easy to operate.