Magnetic Flaw Detector NOVOTEST MPD-DC applies in circumstances where the power control equipment can not be prohibited or regulations.

For magnetic particle inspection applications (where applicable) per specifications ASTM E 709, ASTM E 1444, ASME Section V Article 7 and MIL-STD-1949.

Order a Permanent Magnetic Yoke Set separately or with a complete kit.

  Magnetic Flaw Detector NOVOTEST MPD-DC is intended to detect surface and subsurface cracks of all kinds, then, the poor penetration in structures made of ferromagnetic materials.

 Magnetic Flaw Detector NOVOTEST MPD-DC may apply if you can not use electromagnets, when supply of electricity is difficult or restricted by the rules of safety (during work at height, working in the field, quality control of internal surface of tanks, boilers) at ambient temperature from minus 30C to plus 50C and relative humidity up to 95% at 35C.

 The device is designed as a two permanent magnets placed in a cylindrical shell, connected by a flexible magnetic core and is designed to monitor remote locations and corner welds.

 Flaw detection for high surface and subsurface discontinuities, fractures of all types, check crack, incomplete penetration, in accordance with GOST 21105-87.

 The flaw detector is designed to monitor parts and products of various shapes and sizes of magnetic particle method allows to detect surface and subsurface discontinuity: cracks of different origins, check crack, flake, lack of fusion welded joints, tears etc.