LED Underwater Light

Features :
Input voltage: 24VAC/DC     12VAC/DC
Color: R/G/B/Y/DW/CW/WW/RGB
Standard: CE certification and RoHS compliance
Brand of LED: Epistar
Light source: 3 x 1W high power LED
Net weight: 0.28Kg
Beam Angle: 15,30,45,60,90deg
Size: Dia82*H140mm
IP Rate: IP68

Advantages :
1. Super-clase high power LED which is encapsulated by high efficiency and latest heat disipation structure.
2. Waterproof(IP68), Shake-proof, Energy-saving, Environment-friendly.
3. High luminous efficiency, life-span reachs 50000 hours
4. Operate low voltage
3. 304 Stainless steel
4. Stainless steel panel
5. Safe, Energy saving.

Applications:
Use as underwater decor lighting, such as swimming pool, ponds, fountains, water parks, etc.

Notice Points:
1,To protect the shell, don’t wipe the light with rough res or cleanser and don’t rinse it with high-press water
2,Make light away from the dissolving chemicals to avoide light shell’s destroy
3,Should be used in -20 ~ + 40, or, will shorten light’s lifespan
4,Pls don't use if the light to be mangle or has insulated problem 
5,This light should be installed or repaired by professional person.
6,Pls contact supplier for related product’s information such as warranty, using environment and so on.

Function introduction :
1.Coding
(1)Put all the LED underwater lights in the right order
(2)Connect the light’s transfering connection with coder’s signal output pole, DC 24V power input the accepting pole of the transfering connection.
(3)Connect the output pole of transfering connection together with the light, then, power on. Choose coding button on the coder and set address for the first light(default to be 0001), then press confirm button to finish the 1st light’s coding. The light’s coding will be OK when it flashes green once for about 0.2 seconds During the coding.
(4)Repeat step3 to set other lights’ address, the order will be 1,2,3,4,…,170.
(5)The detailed installation and connection of underwater lights, please to see connection diagram.
 
2.Outer controller
Underground  light can be matched with our company’s DMX controller to realize RGB gradual changing, chasing, waterflow etc. color changing modes. More details to see the instructions of DMX controller.
 
3.This underground light can also be controlled by DMX512 console and get DMX channel automatically according to the coding-address. Every light occupy 3 DMX channel, every channel control the brightness of R/G/B respectively, total 255 rank. E.g., No.1 light’s DMX channel is 1,2,3, then, No.2 light’s DMX channel will be 4,5,6, others can be analogized in this way. One DMX512 console controls maximum 170 different address’(001,002,…,170) lights.
4.Automatic function
When all lights have no any signal, they will be gradual changing mode and show dreamlike lighting.
Remark:
       1.)Every light’s cables at either end is 3m, each address can be used by many pcs lights, same address
will be same color changing mode.
     2.) Shape “T” cable’s distance is 2m(can be made according to the specific request of projects, should not be more than 30m.)
       3.) The total length of 3-pin signal connecting cable should not be more than 100m, add signal amplifier if excess.