Place of Origin	Shanghai, China (Mainland)
Brand Name	QMA
Model Number	Q7000
Output Power	0.4KW~110KW
Output Type	Triple
Size	Depends
Weight	Depends
Input Voltage	Three phase 380v~460v,220V~240V 50Hz/60Hz
Output Voltage	Three phase 380v/415v/440/460/200V~240V(Proportional to input voltage)
Type	AC/AC inverters
Output Frequency	Up to 400Hz available by programming
Output Current	4.8A~450A

1,Special for elevator and escalator
2,13 years manufacture experience
3,CE;ISO9001:2008 certificate
4, Lowest prices

Q-7000 series of brilliant inverters for operation of elevators and escalators are designed to have a lot of exclusive features including Q-7000-EC especially for escalator, Q-7000-EL and Q-7000-IP especially for elevator.

 

*Q-7000 series are all the type adopting IGBT’s PWM control and current vector control, V/F control.

*Q-7000 series have the function such as connection-point-memory & DC0-10V EASY TUNING, loading compensation for start-up torque, and manual vernier adjustment correcting.

*High efficiency and safe function, 300% torque compensation.

*Monitor torque compensation output of theinverter at anytime so as to reduce the shocking the elevator during running.

*The series of products has easy tuning function to the motor parameters and are complied with the regulation of GB, with braking unit (for≤45kw) and speed feedback unit.

 

 

1,Q-7000-EC is for open loop control without built in PG card, especially used for escalator with brilliant performance by long life design and support RS-485 communication port.

 

 

2,Q-7000-EL is used for geared asynchronous motor. PG card is built in for customer to realize the high fine speed control. Q-7000EL support standalone signal, frequency division, isolated signal, and open collector output functions for Encoder. 200% of rated current for 10 seconds. Speed control accuracy is nominal 1:100 and could reach 1:1000 with PG.

 

 

3,Q-7000 IP is used for gearless synchronous motor. It also support standalone single, frequency division, isolated signal and open collector output functions for Encoder. Q-7000IP supports Line drive 8192 C/T. Its ultra-slim design is adequate for machine room-less elevator. It combines 32- digit vernier-adjustment current vector control and stochastic PWM control. The ultra-low noise, with adjustable wave frequency, carrier frequency 2k-15k is adjustable.

 

All of Q-7000 series support the RS-485 communication port and other more functions that customers would find most necessary in elevator controls to provide an inverter that delivers performance which fits the elevator systems.

 

 

Features:

Q7000-EC inverter Special for Escalators

 

*Adopt IGBT’s PWM control *Current vector control, V/F control

*Built-in connection-point-memory & DC0-10V EASYTUNING, loading compensation for start-up torque and manual vernier-adjustment correcting function

*With high efficiency and safety function, 300% torque compensation, and monitor the torque compensation output of the inverter at any moment

*With EASYTUNING function of the motor parameters

*The series of products are complied with the regulation of GB, with built-in braking unit (for≤45kw )

*Built-in speed feedback unit

 

Q7000-EL Asynchronous inverter Special for Elevator

 

*Adopt IGBT’s PWM control

*Current vector control, V/F control

*Support standalone signal, frequency division, isolated signal, and open collector output functions for ENCODER

*Built-in connection-point-memory & DC0-10V EASYTUNING, loading compensation for start-up torque and manual vernier-adjustment correcting function

*With high efficiency and safety function, 300% torque compensation, reducing the vibration of the elevator during its running.

*With EASYTUNING function of the motor parameters

*The series of products are complied with the regulation of GB, and with built-in braking unit (for≤45kw )

*Built-in speed feedback unit

 

Q7000-IP Synchronous inverter Special for Elevator

 

*Current vector control, V/F control

*Support standalone signal, frequency division, isolated signal, and open collector output functions for ENCODER

*Self-correcting compensation function for start-up torque and manual vernier-adjustment correcting, improving the comfort of elevator

*Support LIN DRIVE 8192C/T

*Ultra-slim design is adequate for room-less elevator Multiple modes enable the control more precise, including jog control, speed adjustment, and analog speed control etc

*Combine 32-digitcurrent vector control of vernier-adjustment with stochastic PWM control

*Ultra-low noise, with adjustable wave frequency, carrier frequency of 2 KHz-15 KHz adjustable

*With built-in braking unit (for≤45kw )

*Built-in speed feedback unit

 

Payment terms

We accept T/T or other payment terms negotiated by both of us.

Shipping and delivery

 

1.We can ship the goods to you within 3-18working days after the payment confirmed.

 

2.We can ship the goods by Express, air,sea. Please contact us to choose your preferred ways .

 

Refund and replacement:

1.If  the  items  you received are defective or can't work normally,please notify us within  3days from you received the goods.

2.Any item must be in their original condition for a refund or replacement 

3. we’re not responsible for the demaged caused by improper operation

Contact us

Qma Electric (Shanghai) Co., Ltd

Address: Building No.8, No.115, Lane 1276, Nanle Road, Songjiang District, Shanghai 201613, China

Http://www.usqma.com

Tel:86-021-57603333

Mobile:86-18721221440

Skype: Wendy-usqma

Mail: qma-wendy(a)live.cn