A: product characteristics:

1imported materials, high transparency material.

The 2protection film surface wear-resistant scratch-resistant flowers processing, scratch resistant index of3H.

The 3protection film by ultraviolet light treatment, prevent ultraviolet damage to the eyes.

4 can reduce reflective amounts to 90%, light transmission rate of 99%, the picture is clear and vivid, protect the picture color distortion.

5 not for a long time and metamorphism, not like other paste leave corrosive adhesive on the surface of the screen, safe and reliable. Repeatable paste, do not leave any traces, not corrosion surface.

Two: function

1effective in preventing scratch and wear a LCD screen;

2antistatic surface, not easy to Juchen stain;

3the use of advanced coating technology, direct touch angle is not easy to leave fingerprints;

4special anti-reflective, glare function, eliminating the 98% external environment of the reflected light, strong glare;

Method of use:

1 using a cleaning wipe the screen surface dust and oil dirt wipe clean. ( it may cause post dust, foaming conditions. )

Each of the 2piece of protective film with three layers. Bottom film affixed with a "1" label, surface from the film"2" label. Gently opened the bottom film"1protective film".

3 will paste face down, pulled the protector base film about one in 3, the screen edge aligned flush, side paste side will protect the bottom film slowly pulled out, paste as much as possible when the slow and confirm attached good, avoid the bubbles.

4finally the surface from the film"2" off, such as that found accidentally left a small bubble, available soft scraping card flat pushing bubbles.