Luoke Anaerobic Threadlocker (222/242/243/262/271//272/277/290)
 
LuokeTM threadlocker glue are a cost effective and superior alternative to lock washers, locking threads, and studs. Luoke has a complete line of loctite equivalent anaerobic threadlockers. They prevent loosening due to vibration or thermal expansion on all metal threaded fasteners and provide corrosion resistant seals.
 
The wide range of viscosity spans from very low wicking grades for post assembly sealing and weld porosity sealing to high viscosity for large nuts and bolts. Sealants are available in permanent and removable grades as well as high temperature resistant grades.
 
 
LK222 screw lock:
low strength, thixotropic viscosity, used for locking and sealing of threads between M2 and M8 (better if below M6). Easy removal with ordinary tools.

LK242 nut lock:
medium strength, universal type, thixotropic viscosity. For the M8-M20 thread locking and sealing. removable. With lubrication function to achieve accurate clamping load.

LK243 nut lock:
oil resistance, medium strength, fast curing, can be used to inert surfaces, easy to disassemble. Can be used on slightly greasy surface, can be used for locking and sealing of threads below M20.

LK271 stud lock:
high strength, low or medium viscosity, for permanent locking and sealing of thread below M36.

LK262 high strength nut lock:
high strength, suitable for most metal surfaces. Thixotropic viscosity, good chemical resistance. For locking and sealing of thread below M20. It is a permanent locking thread locking agent, excellent rust and corrosion resistance in extreme chemical environments.

LK272 high temperature stud lock:
high temperature, high strength. Can be used for thread locking of cylinder double heads, fast curing for most surfaces including cleaning fasteners, are suitable for bolts below 1.5''(38mm). Removal calls for heating and tools.

LK277 high strength stud lock :
high strength, high viscosity, excellent chemical resistance. For  permanent locking and sealing of thread below M36. Prevents thread rust and corrosion, removal calls for heating and tools.

LK290 penetrant:
penetration level, high strength, medium or high viscosity, fast curing. Applicable for locking and sealing of thread of assembled screws and bolts between M2 and M12. Also be used to seal welds, iron sandstone porous (below 0.10mm), to prevent rust and corrosion of threads. Removal calls for part heating and tools.