1.high voltage wall sleeving
2.no maintainance
3.enabling the high voltage conductor to pass through a wall or a floor

The FCRG-2 Dry-type Capacitive high voltage wall sleeving made by Beijing Nobbel Electrical Tech Develop Co., Ltd. is used for enabling the high voltage conductor to pass through a wall or a floor, and insulating the conductor from them. It is usually used in a indoor power station etc.

The FCRG-2 Dry-type Capacitive high voltage wall sleeving is different from other similar products at home and abroad. With reasonable design, novelty structure, aesthetic configuration and silicon rubber outer insulation sleeve umbrella group, the wall bushing has no oil, no ceramic, no gas, is convenient for operation and maintenance.

 

1. Advantages:
1. Dry-type insulation
2. No oilfilling, no gasfilling, no ceramic
3. High ability of antipollution
4. Easy operation and maintenance

 

2. Type
  FCRG 2 L 1  /  2
    F: organic composite insulation
    C: wall bushing
    R: capacitive insulation
    G: dry-type and silicon rubber
    2: Serial no
    L: with CT (busbar-type Current transformer)
    1: rated voltage, kV
    2: rated current, A

 

3. service conditions
  Ambient air temperature: –50 centigrade ~ +50 centigrade
  The altitude ≤1000m,if higher,amend according to IEC 60137
  The creepage ratio20mm/kV, 25mm/kV or 31mm/kV

 

4. Technical indexes
  Rated voltage ( Ur ):  33kV, 52kV, 72.5kV, 123kV, 145kV, 170kV, 245kV
  Rated current ( Ir ):  ≤4000A
  Partial discharge:  ≤5pC
  Dielectric dissipation factor:  ≤0.004
  Ith:  25Ir
  All parameters are in accordance with IEC 60137