In this Designed Cable should be pass through Polypropylene – weight which is adjustable

throughout the cable. Floating switch will goes up & down with Liquid Level and when Liquid level

come to the dead weight at that time the floating switch tilted time to 90 Degree so if give

changeover .

DESIGN FEATURES :

· Switches ON the pump when the water in the overhead tank goes below the pre-decided

minimum level.

· Switches OFF the pump when the water level in the overhead tank reaches the maximum

level therefore prevents overflow.

· Switches OFF the pump when the water level reaches the minimum level in the

underground tank therefore prevents dry running.

· Shall again switch ON the pump when there is sufficient water in the underground tank.

· Therefor no need to switch ON or switch OFF the pump.

· Manual switch for bypass.

· Ideal for use in effluent water treatment Plant.

· Low cost with easy installation.

· No calibration required

· Available up to 3/5 mtrs & temp. up to 60 Degree C Max