White heat transfer water resistant hot melt and water ink:

Features: glue edge is completely transparent, after washing can still keep the original transparency . At the same time the glue water not yellow, heat transfer and thermal transfer label is the preferred product. This product is a kind of high performance water-based hot-melt adhesives, lower odor, a translucent glue, VOC was very low, after drying and solidifying forming the hot melt adhesive membrane, tenacity, high transparency, water, oil, grease resistance excellent adhesive properties, high, low temperature thermal viscosity. Water-based hot-melt adhesive is selected a variety of water-based polymers synthesized by hot melt resin PU. The application of various natural, chemical fiber fabric thermal transfer printing glue, with all kinds of transfer printing ink adhesion capability, strong applicability, suitable for a variety of print production process.

[ applicable scope ]: suitable for woven fabrics, denim fabrics, ribbon, nylon chemical fiber fabrics, nylon coated fabric, leather and so on the high requirements of printing.

[ character ]: appearance: paste.

Main ingredients: Japan 's environmental protection polyurethane copolymer of acrylic acid and. Ion: anionic.

[ ]: preservation of greenhouse in storage for three years, at room temperature 0-28℃, avoid exposure or frozen.

[ Characteristics ]: good fastness, covering power strong, feel soft, no irritating smell, environmental protection index of international of fabrics. (through the international SGS certification testing )

Method of use:

A distribution: ( dilution method ) according to the climate conditions can choose water and aqueous diluent to adjust its viscosity and drying rate.

Two. Coating method : screen coating, recommend the use of80 heads -130 head / inch coating, two coating General requirements, ensure the glue coating thickness of 30-50um.

Three. The ironing method: temperature:90-120 degrees, time: 10seconds -15 seconds, pressure:1.8KG

Four. Note:1 Application of cold, hot water washing. 2special substrates required for testing heat transfer. 3avoid light sealing at room temperature, three years can be used.