rolling shutter slats roll forming machine

Model:	100/120/80
Brand:	Sunshine
Origin:	Made In China
Category:	Construction & Decoration / Building Steel & Structure
Label:	shutter door machine , roll forming , roll former
Price:	US $23800 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Simple slitting line

I. SPECIFICATION:

? Suitable material: CR, HR Coils, galvanized steel , etc (σb=360-510Mpa)

? Coil Thickness: 0.5-3mm

? Max coil width: 1300mm

? Coil inner diameter: Φ 508mm( Φ 610mm with bushes)

? Coil outer diameter: ≤Φ 1800mm

? Coil max weight: 10 tons

? Slitting tolerance: ±0.10mm

? Slitting strips width: min 30mm

? Slitting strips no.: max 7

? Machine work speed: 0-40m/min

? Power supply: AC380V±10%, 50Hz

II. WORK FLOW

Coil loading→ de coiling→ feeding & guiding→ centering→ slitting→ scrap

recoiling→ pre-separating & tensioning→ coil rewinding→ coil discharging

III. COMPLETE COMPONENTS

? DECOILER: single arm hydraulic expansion de coiler with hydraulic coil car

loading, expansion range: Φ 460-510mm (bushes for other specs),

capacity: max 10 tons. Coil will be loaded into de coiler by hydraulic lifting

coil car, and fixed by the expansion.

? FEEDING UNIT: mainly consists of base, glide block, pinch roll,

compaction parts, AC11KW adjustable speed motor, etc. Pinch roll for coil

feeding driven by motor power.

? ROLL TABLE: movable roll bridge driven by hydraulic power.

? CENTERING UNIT: mainly consists of work table, pole, movable plate,

vertical rolls, etc. The movable plate can be adjusted manually, used to

control the coil center.

? SILTTER: mainly consists of DC motor, transmission parts, blade shafts,

slitting blades, movable base frame, shaft press down unit, etc. Slitting

blades installed on the shaft and press down, blade shafts rotate driven

by DC motor to slit the coil.

1. Motor power: DC75KW

2. Transmission parts: JZQ650 reducer, gear box, universal joints, etc

3. Slitting shaft: Φ 180mm, material 50Cr heat treatment

4. Slitting blade: Φ 180× Φ 270×20mm, material 6CrW2Si,

HRC57-60°

? SCRAP RECOILER: mainly consists of frame, shaft, tray, transmission,

motor, etc. Scrap tray driven by motor power to rewind the scrap coil.

Motor power: 5.5KW motor, JZQ 400 reducer.

? ROLL TABLE: movable roll bridge driven by hydraulic power.

? PRE-SEPARATING & TENSIONING UNIT: mainly consists of frame,

separate shaft, press-down shaft, separating plate, etc. It’s used to

tension and separate small coils.

? RECOILER: mainly consists of base, reducer, rewinding shaft, brake, DC

motor, transmission, etc.

1. Motor power: DC 90KW

2. Rewinding inner diameter: Φ508mm

3. Capacity: max 15 tons

4. Hydraulic coil car for discharging

? HYDRAULIC SYSTEM: mainly consists of hydraulic pump, pipes, valves,

etc. The system supplies the whole machine’s hydraulic power.

? CONTROL CABINET: 1 set DC control cabinet, 1 set power control

cabinet, 1 set operation control cabinet

IV. SALES CONDITIONS

1. Total Price: FOB Shanghai $108000USD

2. Payment: T/T 30% down payment, the balance to be paid before

delivery

3. Delivery Time: 100 days after receipt down payment

4. Reference document (in English): layout, circuit diagram and

operation manual

5. Installation: the technician can be sent for installation & operator

training at site, but the fee should be discussed separately

6. Operation training: Buyer’s operator training in our factory is free

7. Warranty: one year after test running

Payment Terms:	T/T

rolling shutter slats roll forming machine 1

rolling shutter slats roll forming machine 2

rolling shutter slats roll forming machine 3

rolling shutter slats roll forming machine 4

Member Information

Shanghai Sun Machine Co., Ltd
Country/Region:	Shang Hai - China
Business Nature:	Manufacturer
Phone:	18616927760
Contact:	Darren (manager)
Last Online:	14 Jul, 2014