LVD Magnetic Induction lamp
1.Warranty: 5Years AC120V,220V,277V
2.die-casting aluminum, tempered glass
3,PF0.99 ballast200W

40/80/120/150/200/300W

Low Frequency 225kHz LVD Magnetic Induction lamps Street light 

 

200W 16000Lm

 

Power: 40/80/120/150/200/300W  

Voltage: 120/220/277V AC

Lum: 2800-28050 Lm

Color Temperature: 2700-6500 K

CRI: >80 Ra

Size: 179*114*89mm(40W) -- 280*140*98mm(80W)-351*140*98mm(120W)

351*140*98mm(150W) --L431*W148*H105mm(200W)

Frequency:225kHz

80-85 Lm/W

Life Span:100000h 

Warranty; 5Years 

Switch on/off less than 0.5 secs

The working principle of electromagnetic induction lamp:

• It will transfer the supplied energy into the lamp by coupling the induction from an AC electric-magnetic field, and then create an electron avalanche of the inner filling gas to make it into plasma status. 
• When the excited atoms under plasma stuaus return to the ground state, it will emit UV radiation at 253.7nm.
• The phosphor on the inner side of the bulb wall will get excited by this UV radiation at 253.7nm, and then create visible light.  

The advantage of electromagnetic induction lamp:

• Energy saving more than 75%;
• Ultra-long life no replacement needed, save material and labor;
• Environment friendly, using solid amalgam non-mercury pollution, meets the requirement of environmental protection;
• Good color rendering, close to sunlight and protect the eyes;
• No flash, no glare, protect the eyes not to be tired;
• High power factor, few energy loss, energy-saving;
• The life will not be affected even if switch on/off frequently, the light output will not decline as the fluorescent lamp during life time;
• Good electrical specifications, use the IC chip design, high power factor, low current harmonics, steady voltage supplying, steady output of luminous flux;
• Optional color temperature and natural color;
• Can be made to colorful versions for wider application;
• Instant start without preheating, Prevent from the illumination interrupt by the reason of power cut, it can quickly start, be suitable for the emergency lighting without preheating;
• The electromagnetic interference (EMC) conforms to the IEC standard;