1.Name:LIKE Aluminum Honeycomb Panel

 

 

 

2.Material: Aluminum alloy, the grade of aluminum alloy can be selected according to the actual requirements

 

3.Surface treatment: Service coating for back, PVDF coating or PE coating for the front sheet. Other special requirements will be fulfilled.

 

4.Feature:

1)The honeycombed cores of different sizes have an extremely level and Straight degree and the feature of being not easy to distort.

 

2)The LIKE aluminum honeycomb panels and ceiling we produce mainly use the fluorine-carbon to coat the aluminum plates, mostly importantly, the continuous pre-rolling and coating technique has been used therefore it enables to finish the aluminum roasting for one time only.

 

3)There is no chromatic aberration for the product, which has a good flow level for the coating and a reliable quality.

 

4)It can keep the clean and bright appearance for the building for a long them since it has a good adhesive force and resistance to weather.

 

5)The honeycombed plate with an interlayer plate is only 1/5of weight of the aluminum plate of the same rigidness and/1/10 of that of the steel plate.

 

6)honeycomb cores of the honeycomb composite plates are separated into many sealed compartments, which block the flow of air, and also the heat and sound waves, the sound source of 100-3200Hz can be reduced to 20-30db, the heat conduction of 0.1040.130 W/M.K, therefore energy absorption ability of the honeycomb plates are up to 150-3products500 KL/M2, which makes the products as idea; energy-saving materials.

It would make strong noise when rain drop on the aluminum board or the aluminum plates, while the honeycomb panel wall can avoid such cases

5.Specification 

-width: max1500mm

-length: max3600mm

-total thickness: 6mm-25mm

-front plate thickness: 0.6mm-1.0mm

-base plate thickness: 0.5mm-0.8mm

-core: 12mm-19mm

-weight: 6kilos/m²