Metal Embossed Insulation & Decorative Panels are made of the outer embossed metal plate and inner thermal insulation materials ( or pourability foam).

KRS Metal Board is made of extruded polystyrene insulation materials, polyurethane, phenolic foam etc, and the outer is made of carbon aluminium alloy plate or Al-Zn coated steel.

Metal Embossed Insulation & Decorative Panels can be painted into different colors with special coatings and different patterns according to the different projects. The pattern include Brick Series, Grain Coated Series, Water Wave Series, Wooden Finish Series, Cultural Stone Series, Marble Stone Series and so on. The different patterns make the building not only achieve artistic effect but also meet the energy-saving requirement.

Metal Embossed Insulation & Decorative Panels combine many advantages of modern abroad wall materials and integrate multi-functions as heat insulation, decoration, environment protection and resistance to rain, frost, seismic, etc.

The production of Metal Embossed Insulation & Decorative Panels are automatically controlled by the computer, so the quality is stable and the production ability is good. The connection between panels is scientific design and strictly test, there is no any leak and no cold(hot) bridge, at the same time the anti-bend function increase a lot.

Metal Embossed Insulation & Decorative Panels are connected in a scientific and strong way, which not only meets the strength when installation, but also effectively avoids the problems of shedding, cracking, and the cold(hot) bridge. And it is simply constructed, with no seasonal restriction, light and easily transportation, easily installation.

Metal Embossed Insulation & Decorative Panels are applicable to the much cold areas for example North China, Russia and Canada. It can be used as wall cladding, Heat insulation board or interior decoration board on residential house, commercial building and public construction.



Metal Embossed Insulation & Decorative Panels Advantages

ü Excellent Heat Insulation
Metal Embossed Insulation & Decorative Panels uses extruded polystyrene foam(XPS), polyurethane foam(PU, PIR) and phenolic foam as insulation materials, so the heat transfer coefficient of the panel can reach 0.27-0.53W/㎡K achieving an excellent thermal insulation effect. Stability of the chemical structure may assure the durable heat insulation performance, energy saving and environment-friendly.



ü Light Weight and Easy Transportation and Installation
Light weight 2-4.7kgs/㎡. It is easy to transport and install, then save the construction cost.



ü Various Choice and Long-Lasting Life
The outer panel is made of aluminium plate, galvanized steel and other metal panels, and the surface is coating into different colors and rolled into different patterns such as Brick Series, Grain Coated Series, Water Wave Series, Wooden Finish Series, Cultural Stone Series, Marble Stone Series and so on. The system construction and decorative surface of the panels is reliable to resistance to acid rain and salt spray, adapting to a highly corrosive environment. And the lifetime of the coating is no less than 15 years, structure is no less than 45 years.



ü Strong resistance to deformation
The compounded panel is resistance to the wind pressure, bending and deformation. According to the specific projects, a backplane can add to be directly used as retaining walls. The embossed metal is resistance to the thermal expansion and contraction to a certain degree, and will not be cracking.



ü Widely Application
Metal Embossed Insulation & Decorative Panels are specially suitable for the much cold regions. The system has good performance of anti-thermal expansions and contraction. In the cold areas, it can avoid such problems like plaster cracking and spalling caused by freezing and thawing. In the hot and wet climate, the surface dry quickly, then can prevent the wall mildewing.