Composition of machine
Roll forming main machine 1 unit
Manual Uncoiler 1 unit
Control panel 1 unit
Hydraulic station 1 unit
Manual out table 2 unit
Spare tools one box
Detail Of Roll forming main machine
1: Coil width: 100/140/150/180/200mm
2: working speed:
12-15m/min (not contain cutting)
3: roll station: 13stations
4: material of roller: 40Cr, CNC lathes, hard Chrome Coated
5:material of main shaft:
45﹟forge steel diameter roller: Ф76mm
6: main power: 15KW motor.
7: forming thickness: 1.5-3.0mm 250MPa actual yield strength values of coil
8: Transmission: by single Chains 1.5 inch
9: feeding and guide: surface polished and coated with chrome
10: machine adopt new station
11: Cutting:
(1) Hydraulic Cutting after forming: Cut the sheet after roll forming to required length
(2) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(3) Material of blade: CR12with heat treatment
(4) Length measuring: Automatic length measuring
(5) Tolerance of length: 3m+/- 1.5mm
(6) Cutting wastage of coil material: 1cm for each piece of cutting