High Voltage Electrical Fuse Cut-out

High Voltage Electrical Fuse Cut-out
Model:high-voltage-fu
Brand:-
Origin:Made In China
Category:Electronics & Electricity / Breaker & Protector
Label:High Voltage Fuse , Drop-Out Fuse Link , Polymer Drop-Out Fus
Price: -
Min. Order:-
Inquire Now

Product Description

Scope of application
PRW8 series outdoor high voltage Drop out fuses are used in the system of Az 50Hz ,rated voltage 10KV~35KV outdoor aerial distribution lines,to protect the circuit or power transformers against overloadeing and short circurt faults,The model marked with “F” can switch om/off loading current.The product in service will have an isolating breaker after fuse carrier drop out ,this is to secure to safety during maintaining and repairing.

This series of product s complies with the standards of GB 15166.3 and IEC60282-2.


Product feature
1. This series of product is designed as gas exhausting from one side,which it can trip overloading and short circuit fault current
reliable . and avoid the circuit or equipment on upside being damaged.
2.Upside contacting socket will use spring to give positive pressure on the upper moving contact of fuse carrier,keep good contacting .
3.General terminals can hold different conductors.one wrench can perform the connection.
4.This disconnect stick can push the fuse carrier in ON position,meanwhile it can operate for portable load cutter.

High Voltage Electrical Fuse Cut-out  1

Member Information

Yueqing Xingda Electrical Co.,Ltd
Country/Region:Zhe Jiang - China
Business Nature:Manufacturer
Phone:62768666
Contact:qingfeng cai (qingfeng cai)
Last Online:22 May, 2013