1、trong intensity connector, stable and reliable; no specific requirements on the weldablility of the rebar;

2、Only needs 1 – 3m to stamp each connector, which is about ten times faster than ordinary welding;

3、Only 1 – 3 kw power of oil pump , which is not limited by power capacity, has flexible structure and suitable for operation on several machines;

4、No flammable gases, not affected by rainy or cold weather

Principle of cold stamping system:
.Using the cold squeezing machine to press connection point to link two rebar


The machine including two set of machine:

LJY-40 process rebar whose diameter is 36mm , 40mm