Fix the processing panel,move the Edge Bander to edge banding

 

This method is suitable for big size panel .

 

 

The machine can be fixed on a stand with a conveyor table,just move

 

 the panel  when operate.The shelf which forms a working table is a

 

facility of the machine.This method is suitable for small size panel.

 

 

 

 

(1)When the machines is used for small sized wooden boards,the machine

 

can be fixed on a stand with a conveyor table,and the process of edge

 

banding is the same procedure for normal sized boards.

   (2)When the machine is used for bigger sized wooden boards and half-finished

 

wooden products, the bigger boards and half-finished wooden products must be

 

fixed in a place. Then the hand-held edge bander can proceed, and the entire

 

edge  of the wooden board must be clear without obstacles halting the process.

 

 

(3)Technical data:

 

Mini radius of banding :15mm     Sending power: 25w

Feeding speed: 4m/min        Machine size :400×400×380mm  

Packaging size :440×440×410mm   Net weight: 11kg     Gross weight: 16kg    

 

Application range :Benting material of melamine,veneer and plastic tapes

 

Thickness of banding: 0.3 to 3.0mm      Width of banding :10-40mm

 

Shape of Workpiece :Straight and irregular