Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrato is made of two fixed eccentric shafts whose gears are jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to produce a linear huge power which forces the vibration, the materials will slip and sling on the funnel, moving forward. When the materials pass the screen part, smaller parts will fall down; avoiding the further crushing, so screening purpose can be reached.Brief introduction

The vibrating feeder is used to transfer the materials from hopper to receiving device evenly, periodically and continuously. In crushing plant, it feeds materials timely into the crusher, and separates the materials firstly. It is widely used in the crushing and screening plant, in the field of metallurgy, coal mine, mineral separation building material, chemical industry, grinding, etc.

Performance features

1. It is of even vibration, reliable operation, long life.

2. Its vibration force can be adjusted. The flow quantity can be changed and controlled any time.

3. Motor is the excitation source, with low noise, low power consumption, and good adjusting capability.

4. The structure is simple, it performances reliably, and it is light, small, and easy for adjustment and installation. It can avoid powder and dust when using the sealed body.
http://www.jbs-crusher.com/index.asp