Shoe Mold Silicone Rubber

Model:	HY218 silicone
Brand:	Hong Ye Silicone Rubber
Origin:	Made In China
Category:	Chemicals / Rubber Materials
Label:	shoe mold silicone , molding silicone , rtv silicone
Price:	US $4.8 / kg
Min. Order:	200 kg

Inquire Now

Product Description

1 . Features of Shoe mold silicone rubber

a. shoe soles mold making

b. Two-component silicone rubber with tin-catalyst

c. Cured under room temperature

d. low shrinkage

e. excellent fexibility & easy demould

2. Shoe mold silicone rubber applications

Shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.

3.Shoe Mold Silicone Rubber Standard Datasheet:

Model	Appearance	Viscosity (cps)	Hardness (A°)	Tensile Strength (Mpa)	Tear Strength (KN/m)	Elongation (%)	Mixing ratio (%)	Pot life(H)	Demould time(H)
218	White	≤15000	18±2	≥1.3	≥5	≥300	2~3	0.5~2	2~4

Notes: Mixing ratio, pot life and Demould time in the above table is measured under the room temperature of 25。C, relative humidity of 65% to 70%. The data is only for referfence, mixing ratio should be 2% to 3% modified according to various temperatures. Different colors are available if requested.

4.Shoe Mold Silicone Rubber Using Instruction:

The component A of shoe Mold Silicone Rubber is white flowing liquid and the component B is the curing agent.

a. Take silicone rubber of 100g and add 2% curing agent for mixing evenly.

b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.

c. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.

Notes:

Shoe mold silicone rubber is used for pouring or brushing technique. That is to say, fix the product or sole model to be duplicated onto a plane plate, then enclose the plane frame with wooden plates to prevent the leakage of the silicon, mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model, then brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.

Any more information, please feel free to contact Ms. Aimee.

MSN:aimeezhou055722(at)hotmail(dot)com
Skype: aimee055722
Email:hysz(at)szrl(dot)net
Tel: 0086-755-89948294
Mob: 086-18938867541
Fax:086-755-89948030
Web:www(dot)szr(dot)net