Lightning Protective and Surge Immunity Transducer (China Manufacturer) - Sense Organ - Electronic Components Products

Lightning Protective and Surge Immunity Transducer

Model:	-
Brand:	-
Origin:	Made In China
Category:	Electronics & Electricity / Electronic Components / Sense Organ
Label:	Current sensor , Voltage sensor , Hall sensor
Price:	US $35 / pc
Min. Order:	10 pc

Inquire Now

Product Description

WM SeriesLightning Protective and Surge Immunity

High Performance Transducers

More PROTECTIVE

GOOD EMC PERFORMANCE

CEand RoHSconformance

Features Summary

WM Series protective Electrical Transducers / Sensors are special made Separation modules which have more enhanced EMC circuitry design and lightning-protection design to provide customers with better working performance. These series transducers which are featured with high accuracy, high voltage insulation, broadened bandwidth, big operating temperature range, small temperature drifting and low power consumption, and can be used in hazardous environment.

Applications

These series product lines are suitable application for real-time measurement & monitoring of all kinds of power equipment, air-conditioning units in telecom station to secure the telecom system working normally. And the Products are also suitable application for signal measurement and monitoring of industrial field control.

Main Technical Index

Over load capacity	AC current input (H) : 10 times of nominal input value; hold for 1 second; stop 10 seconds; can repeat 10 times AC current input (F; R-3-phase): 20 times of nominal input value; hold for 1 second,; stop 300 seconds, can repeat 5 times
Over load capacity	AC voltage input ：2 times of nominal input value; hold for 1 second; stop 10 seconds; can repeat 10 times
Linear range	0%-120%
Frequency	25Hz-5KHz
accuracy	0.2%; or 0.5%
Load capacity	Smaller than 500Ω or 300Ω
Response Time	200ms to 300ms
Thermal Drift	350ppm
Output ripple	Smaller than 10mV
Isolation Voltage	DC 2500V; AC 2000V (for surge immunity)
Operating Temperature	-25°C - +70°C Relative Humidity：≤95%；no water condensation
Regulation agencies followed	EN 61326:2006; EN60100:2001; IEC61000-4-5;IEC61000-4-2