BRIEF INTRODUCTION

MD4000AL/MD5000AL metal detector detects even the smallest metal particles safely and reliably in every type of aluminum-packaged products. Compared with X-Ray scanners, MD4000AL/MD5000AL overcomes the high density differences in product or high evaluation thresholds due to variations in the production process. The intelligent, passive magnetic surface sensor works without wear, contrary to X-Ray scanners, and is easy to operate as the systems works without X-Rays. Wet and salty products such as cheese and meats do not affect detecting performance. Wires, chips and broken injection needles are reliably detected irrespective of product orientation.

FEATURES

Dual Sensor Type (More Stable Higher Accracy)

Without hazardous X-Rays

Wear - free detecting system

No need to care about “product effect” & “hot temperature”

Usable with every type of aluminum - packaged products

Configurable Passing Height (Min. 50 ~ Max. 150mm by every 10.0mm)

Password Setup Function

Low investment and maintenance cost

No need to be certified or inspected by government law

Product orientation does not influence the signal strength

Easy to learn & No need to train an operator

Connectivity to Various External Devices

Manageable Metal Detecting History

Easy Software Update

SPECIFICATION

Note:

• Metals that exhibit magnetic properties such as iron and SUS 430 and stainless steel processed by cutting and bending (placed under stress) such as SUS 304 and SUS 316 can be detected. Aluminum, brass, copper, silver, gold, lead, titanum, etc. cannot be detected, because they cannot be magnetized.
• MD-5000AL is only be suitable for product package length less than 300mm
• For further information, please consult with Hongkong SINBON Industrial Limited