Introduction：

◎ Used for profiles such as aluminum profile and curtain wall, two heads cutting angle 

   90°45° 67.5° (22.5°) are available.

◎ Cutting dimension controlled by screw, with high accurate driving and locating. Right 

   head can achieve the setting location automatically. Right head feed the profiles 

   automatically; can also use for cutting aluminum connectors.

◎ Japan CNC system adopted, which include PLC, touched screen, servomotor, and 

   servodriver, photoelectrical switch, and photoelectrical cells etc. Complete Japan 

   CNC system results highaccuracy and smooth working.

◎ Uniform speed feeding and smooth motion due to air-draulic damping cylinder.

◎ Saw blade feeding system adopts imported linear guide kinematic pair results high 

   accuracy.

◎ Automatic protecting guards result convenience and safety.

Technical Parameter：

Model                                       LJZ2-CNC-500×5000   

Input voltage                           380V/50Hz

Input power                             6.0Kw  

Air pressure                            0.5~0.8MPa

Air consumption                    200L/min

Motor rotation speed            2800r/min  

Cutting length                        400~5000mm

Cutting width                          10~130mm

Cutting height                        10~300mm

Cutting angle                         90° 45° 67.5°

Saw feeding speed            0~3m/min 

Saw blade standard          φ500×4.4×φ30×Z120

Overall dimension              6300×1700×1600mm