vinyl cutter with digital control max cutting width 1260mm 50''
CE approval vinyl cutting machine

cutting plotter

1.The appearance design of the patent  streamlined fuselage,carry the putting type control panel,easy to operate,elegant appearance
2.Adopting new microstep to subdivide algorithms,being in highly cutting quality while cutting at a high speed,the curve is smooth and more evasive
3.Softwae has the capacity to adjust the cutting precision to solve and prolong the inconsistent problems of size differently when all kinds of materials of malleability are cut.
4.Improve shock attenuation and subdue the sound device , reduce the noise further, but the power of the motor is not reduced.
5.Advanced industrial aluminium alloy fuselage, the surface is not worn and torn to fade through special-purpose processing..
6. Pairs of layering pairs of knife location, besides layering originally, set up half hob one, can is it is it carry heat of adhesive tape is it print paper , clothing pattern ,etc. to transfer to to have to cut
7. Leather card special purpose interface software, can establish partial is it compensate with the corner compensating to close, needn't carve characters software can carve characters directly specially.
8. Passing national security , performance and environment test in an all-round way performance is more reliable

Machine detail:
Cutting speed	50-800mm/s
Cutting width	1260mm
Cutting force	50-500g
Buffer capacity	1M
LCD	Yes
CPU	8-bit CPU
Strip of plotter	Plastic sheet
Drive	Stepping
Maximum media thickness	0.25mm(10mlls)
Maximum cutting speed	40cm/s((17ips) in al directions
Maximum acceleration	4m/s²
Maximum character matrix	Approx 5mm(0.2") high
Blade type	Super steel (1.2mm)
Pen type	Water-base fibertip
Film type	Self-adhesive vinyl film, fluorescent film, reflective film, paper
Display panel	8 digits*2 line LCD
Offset	0-1mm
Interfaces	Parallel serial
Power requirements	AC220V±10% or AC110V±10%
Power consumption	60W max
Repeatability	0.127mm
Mechanical resolution	0.0254mm/step
Commands set	DMPL
Environmental temperature	0-35°C
Environmental humidity	5%-65% (without condensation)