Materials:
1) Pump body: Cast iron
2) Impeller: Cast iron
3) Motor housing: Stainless steel 304#
4) Mechanical seal: Steel
5) Shaft: 45# steel / SS 420
6) Bearing: Steel

RANGE OF PERFORMANCE
Flow rate up to 18 m3/h
Head up to 12m
Power up to 1.3KW
With thermal overload protector.

LIMITS OF USE
Immersion depth up to 5 m
Liquid temperature up to + 40° C
The pH figure of the water is between 4~10
The maximum density of the trans medium is 1.2*103 kg/m3

APPLICATION
This pump with cutter is an ideal machine for draining sewage. A high speed rotating cutter is assembled at the inlet hole of the pump, make it easy to cut off long- fiber and firm sundries contained in the sewage. The float switch can automatically control on and off with the change of the liquid level. The protector in the motor can automatically cut off the power when it overheated or overloaded, thus guarantee the security and reliability of pump's run even in the atrocious environment.