MH100 Pen Type Hardness Tester

Overview
With the Leeb hardness measuring principle, the pen-type hardness tester MH100 can do test easily and quickly to various metallic material. It can show the hardness measuring value immediately and can switch to other scales freely.

Specification
*Measuring Range: (170-960)HLD, (17-68.5)HRC, (19-651)HB, (80-976)HV, (30-100)HS, (59-85)HRA, (13 -100)HRB                              
*Measuring Direction ：Supprt 0~360º
*Hardness Scales：HL、HB、 HRB、 HRC、HRA、HV、 HS
*Display：HD dox matrix LCD and LED backlight
*Data Memory：Max. 500 groups（relative to impact device 32～1）
*Working Power：3.6V（Integrated Lithium battery and rechargable circuit
*Continous Working Period：about 200 hours （without using backlight）
*Communciation Interface：USB1.1 port

Applicable Materials
Applicable materials: steel and cast steel, cold work tool steel, stainess stee;. Grey cast iron, nodular cast iron, cast aluminum alloys,BRASS (copper-zinc alloys), BRONZE(copper-aluminum/tin alloys), pure copper and forged steel

Working Conditions
Operating temperature -20℃～＋60℃；
Storage temperature：-30℃～＋60℃
Relative humidity: ≤90％；
The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust.

Standard Configurations
1．Main Unit      1
2．Cleaning brush  1
3．Small support ring  1
4. Standard block   1
5. Dataproceeding Soatware with cable  1
6．Accompany documents (including manual, quality certifcate, warranty card and packing list )  1 set
7．ABS instrument case 1