Technical data

Melt Temperature

180 to 220 °C 

Density

0.950 g/cm³ 

Melt flow rate (MFR)

0.4 g/10 min (190°C/2.16kg)

Tensile Modulus

1000 MPa 

Tensile Stress at Yield

23.0 MPa 

Tensile Strain at Yield

10 % 

Charpy notched impact strength

5.5 kJ/m² (-30 °C)

Charpy notched impact strength

12.0 kJ/m² (23 °C)

Vicat softening temperature

70 °C (B50 (50°C/h 50N))

Shore hardness

60 (Shore D)

Ball indentation hardness

44 MPa (H 132/30)

ESCR (Basell)                                       

Applications:

HDPE (high density PE) - is used in products and packaging such as plastic bags, milk jugs, detergent bottles, margarine tubs, garbage containers, water pipes, woven bag, raincoat, polyethylene monofilament, woven yarn etc.. LDPE resins are made by high pressure autoclave process and mainly used for blown film extrusion and wire coating (cable sheath) etc.. They are widely used for applications for general purpose packaging films, heavy duty bags, shrink films, and foams.