Model: | QX-014 |
---|---|
Brand: | QX |
Origin: | Made In China |
Category: | Chemicals / Plastic Materials |
Label: | Nylon/ Flame Retarde , plastic chemcials , polymer |
Price: |
-
|
Min. Order: | - |
TEST ITEMS | TEST METHOD AND CONDITIONS | TEST RESULTS | ||
TEST METHOD | UNIT | CONTITIONS | ||
(DRY)23 | ||||
Density | ISO1183 | g/cm3 | 1.1 | |
Melt Volume Rate | ISO1133 | cc/10min | (275)2.16kg | 43.2 |
Tensile Strength | ISO527 | MPa | 10mm/min | 67.8 |
Tensile strain at break | ISO527 | % | 5 | |
Flexural Modulus | ISO178 | MPa | 2,800 | |
Flexural Strength | ISO178 | MPa | 2mm/min | 82 |
Charpy Notched | ISO179 | KJ/m2 | 2.9m/s-1J | 11 |
Izod Notched Impact | ISO180 | KJ/m2 | 3.5m/s-1J | 8.6 |
Flame resistance | UL-94 | V-0 | ||
Processing Guidelines | ||||
Material Handling
Max. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient |
||||
Typical Profile
Melt Temperature 250-280°C (482-536 °F) Mold Temperature 60-90 °C (158-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi) |
||||
Fill Rate
Fast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate |
Handan Hanshan Jinteng Trading Co. Ltd | |
---|---|
Country/Region: | Shan Dong - China |
Business Nature: | Manufacturer |
Phone: | 13722378488 |
Contact: | Bonnie (Sales manager) |
Last Online: | 13 Nov, 2013 |