S1100 popular type for industrial application

Model:	S1100
Brand:	SANCH
Origin:	Made In Taiwan, China
Category:	Electronics & Electricity / Transducer
Label:	VFD , AC Drive , frequency converter
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

S1100 Series Inverter

More professional control program

Professionally customized core computing program,Smooth shift on forward and reverse rotaion,Automatic torque compensation,Automatic slip compensation.

Lower heat

Advanced control technology of switching 3-phase to 2-phase,reduces heat by 33.3%.

Faster computing speed

Adopting nanometer manufacturing technology, CPU with built-in dual core makes the computing speed dramatically improve.

More excellence performance

A variety of customized functions bring maximum benefits and convenience to users.

Reliability

·Protect function:over voltage(OU),low voltage(LU),over current(OC),over heat(OH),over load(OL)

·Over voltage and over current stall prevention

·The technology of integration hardware and software wave filtering for better anti-jamming effects

·3-level prohibited frequencies can avoid resonance effectively

·Braking using software control,be able to adjust brake-bit and brake occupating coefficient

High performance

·Automatic torque compensation-start torque can be up to 150% at 2HZ

·Aautomtic slip compensation-more accurate speed

·Ultra-low noise-motor runs more stably

·High overload capacity-150% rated torque can last for 65 senconds

Multi-function

·PID feedback control

·Oscillation frequency function

·Built-in PLC enables 16-level speed program running

·Multifarious frequency input methods:pules input,AVI/ACI superimposed,UP/DOWN,RS-485 and so on.

·Multifarious control methods:operation control,exterior terminal two-line/three-line control,RS-485 control.

·Multifarious stop methods(OFF stop,stop for AVI zero)

·Multifarious input methods:external EF,couting input,frequency switching,Pendulum frequency input and so on.

·Multifarious output methods:multi-function relay output,multifunction collector open circuit output

Multifarious output methods:indication of forward and reverse rotation,counting arrival,program

·operation,and faults.

Other functions: power failure memory,running-locked when power on,automatic voltage

·regulation(AVR),DC brake,password protection

Thyristor power controller

SPC3 series full-digital three phase Thyristor power controller Which integrates functions of open loop,constant voltage,current,power,power regulation (pass zero) control,control into one and adopting full-digital design to optimize hardware design and strengthen software function can be applied widely to control and regulate three phase,current.power in various industries.Standard communication interface equipped on the controller can meet requirements of high accuracy control. Therefore, it is suitable for resistive load, inductive load and transformer primary side.

Main features

High integration

With integrates functions of control.display and exterior fittings into one is connected easily and operated conveniently.

Phase shift and voltage regulation:adopt phase shift and voltage regulation within short time after starting(soft starter)

Pass zero power regulation:reduce harmonic pollution to power grid

LZ control can avoid current impact influenced by load which is caused by great various between cold status and hot status of resistance to controller and power grid.

Full digital high accuracy phase shift trigger(phase shift accuracy:1000 graduations per 180 degree)

Various control modes

Six control modes: open loop constant voltage,constant current,constant power,power regulation (pass zero) control.LZ control;It can be used flexible to reach an optimized load control.

Constant voltage,constant current,constant power can be controlled by effective value.

Strong programmable function

Able to on-line setting debug 118 parameters through Modbus communication. Can meet individuation requirements of various industries in largest extent.

Mighty anti-interference ability

Adopting isolation technology in output and input with anti-interference ability.

Safe and reliable operation

User can operate the device safely and reliably because the device is equipped with safety isolation in control , power part relay output warning and twice rating current protection and SCR overheat prevention.

Input Voltage

220V

440V

Model number: S1100-2T/4T□□□G

0.75

1.5

2.2

0.75

1.5

2.2

3.7

5.5

7.5

18.5

Output

Applicable motor power (KW)

0.75

1.5

2.2

0.75

1.5

2.2

3.7

5.5

7.5

18.5

Output rated current (A)

5.0

6.5

3.0

4.2

5.5

8.2

Max output voltage (A)

Input power

Over load capacity

150% of rated current and run for 65 seconds

Power

Phase . Voltage . Frequency

1-phase/3-phas 200-240V 50/60HZ

3-phas 380-460V 50/60HZ

Allowable variation range of Voltage Frequency

Voltage: ±15% Frequency: ±5%

Input current (A)

11/7.4

15/10

27/15

4.2

6.0

7.2

8.5

20.6

Controlling Characteristics

Control mode

Adopting SVPWM modulating techniques(V/F control and Speed Sensor-less Vector)

Output range of frequency

0.01~400.0Hz

Frequency setting analyzing degree

0.01Hz

Output frequency analyzing degree

0.01Hz

PWM load wave frequency

Available to modulate from 2 to 10kHz

Torque increase

Auto torque-increase and auto slip compensation at 2 Hz the starting torque can reach 150% of rated torque.

Jog frequency

3 points can be set from 0.01 to 400.0Hz

Acceleration/deceleration time

0.01 to 600.0 seconds. (2 steps of accel/decel time can be set separately.)

Stall Prevention Level

According to the load characteristics of motor, it’s available to be set as 50 to 200% of the rated current of the drive

DC braking

According to be operated from 0.01 to 400.0 Hz from STOP, braking 0 to 100% of the rated current. Starting time 0.0 to-60.0 sec, Stopping time 0.0-60.0 sec

Braking torque

20% (125% shall be available if connected with purchase braking resistor externally) (or 1 to 25HP, equipped within the electric crystals, for 30 HP, braking unit module shall be connected externally.)

V/F curve

V/F curve available to be set

Operation characteristics

Frequency setting signal

Digital Operator

Set by UP and DOWN

External terminals

0-10VDC, 4-20mADC, Series Communication Board (RS-485)

Running operatisignal

Digital Operator

Available to be operated by RUN, STOP and JOG keys.

External terminals

2 wire style (Fwd/Stop, Rev/Stop, Run/Stop and Fed/Rev) /3 wire operation, JOG running, Serial Communication Board(RS-485)

Intelligent Input Terminal

Switching of 16 step pre-set available speed; Switching of First/Second acceleration/deceleration time; prohibiting acceleration/deceleration and external interrupt reference. Low voltage detection, operation mode reference, fault output and external fault interruption.

Intelligent Output Terminal

During running, frequency agreement output, non-zero count agreement output, over torque output, external interrupt reference. Low voltage detection, operation mode reference, fault output and external fault interruption.

Analog signal output

Correspond to actual output frequency or output current.

Fault signal contact

Contact of ON at AC motor drive (Relay with one C contact or two open collector output.)

Built-in Function

Setting max/min output frequency; momentary power off restarting; setting of S curve acceleration/deceleration time; auto-voltage stabilizing output modulation; digital frequency output signal; fault records; parameters locking; reset to factory setting; inhibiting reverse run; over current stalling prevention, over voltage stalling prevention, electrical thermal relay.

Protection Function

Over current; over voltage, low voltage; external fault interruption input; motor over load; GFF: grounding protection(For optional use); over load of the drive and drive overheating

Digital operator

Consisting of 8 functional keys, 7 step LED in 5 digits; 5 status LED indicators. Available to set frequency, display actual output frequency, output current, self-determined unit parameter overview of users, modify settings and for parameter locking, fault displaying. Available to perform running, stop, reset, fwd/rev run and jog run.

Environment

Operational Environment temperature

-10℃ to +50℃ (+40℃ ~ +50℃ available when the dust cover is removed)

Storing temperature

-20℃ to + 60℃

Installation height

Lower than 1000m, without corrosive gas, fluid and dust.

Vibration

Below 20Hz 9.80665m/s² (1g), 20~50 Hz 5.88m/s² (0.6g)

Protection degrees

Determined by the installation environment of the end-users.