OK6410 Carrier Board Resources |
Reset |
One Reset key with dedicated chip, stable and reliable |
DIP switch |
Boot options, using 8-bit DIP switch. |
Serial |
Four serial ports: one 5-line serial port with DB9 female, three 3-line (3.3V TTL) with 2.0 X 20 pins. |
Ethernet |
One 100Mb Ethernet, using DM9000AE with connection and transmition status indicators. |
USB HOST |
One USB HOST, support USB1.1 protocol,used for mouse and U disk etc. |
USB OTG |
One USB Slave,support USB2.0 protocol,using mini-USB socket,can be used for PC connection. |
SD card |
One high-speed SD socket, used for SD Memory and SDIO functionality. |
WIFI |
One WIFI expension interface |
Audio |
Three 3.5mm standard stereo audio jacks, one for headphone audio output, and one for microphone input, andone for line input.
|
LCD |
Touch panel support 4-line resistor, LCD support 3.5, 5.6, 7, 8 inches TFT LCD. and 10.4 inches LVDS.
|
Camera |
One CMOS camera,support ITU-R BT601/656 8-bit mode, using 10X2 pin connector, support varies USB cameras.
|
RTC |
Internal Real Time Clock, with backup battery. |
JTAG |
One JTAG interface,using 10x2 pins connector. |
Temperature Sensor |
One one line temperator sensor(DS18B20) |
Infrad |
One Infra-red sensor (38Khz). |
LED |
Four LEDs |
Buzzer |
One buzzer with 5V power supply. |
Expensionports
|
Three 10×2 pins expansion ports, one includes GNDx1, 1DAx1,8-channel AD, IOx10, and SPIx1, and another one for 8×8 matrix keyboard, the last one includes three 3.3V serial port(one 5-line, two 3-line)
|