Wisman MRS series high voltage power supply is a special power, this power supply is high or negative high voltage output, high pressure can realize the linear steady rise.MRS series power supply also can be connected with the potentiometer to realize the remote control of output voltage and current, and has the external voltage and current display port, a high-voltage output terminal overvoltage and short circuit protection, safety interlock function.

Typical application:

Tester, thickness tester, capacitance charging, photomultiplier tube

Microchannel plate detector, scintillator, mass spectrometry, electron and ion beam, electrostatic lenses, nuclear instrument, electrostatic printing

Optional function:

DC DC filament power supply

CPC constant power output

Specification:

Input: 24V ± 10% DC current specific configuration, according to the high output power, the maximum current 4.25A.

Output: 1V, 2KV, 3KV, 6KV, 8KV, 10KV, 15KV, 20KV variety of maximum voltage output optional, 1W, 2W, 3W, 4W, 5W, 6W, 7W, 8W, 9W, 10W, 15,20W, 30W, 40W, 50W,

The output voltage is set in 0V to the highest voltage.

External remote control: external 0V to the 10V control signal can be output from 0V to the maximum output voltage.

Voltage regulation rate:

Relative load: 0.01% (no load to rated load)

Relative to the input: ± 0.01% (a change in input voltage of ± 10%)

Current regulation:

Relative load: 0.01% (no load to rated load)

Relative to the input: ± 0.01% (input voltage variations of ± 10%).Output ripple voltage: rated voltage condition, the ripple voltage peak

Value of the maximum output voltage 0.25%.

Environment temperature: 0 ℃ to +50 ℃.

Humidity: 20% to 85%RH, no condensation

Temperature coefficient: 0.01% per degree celsius.

Stability: starting up half hours after every 8 hours less than 0.05%.

Voltage current instructions: 0V to +5V, rated output condition and precision of 1%.

Dimensions: length 143mm, width 100mm, high 42mm

Connector:

High voltage output connector:

With the high voltage output line.

Input output connector: Lu pin terminals, including control and display signals.

The output voltage and current of the remote control:

External potentiometer can be used inside power supply 10V voltage reference on the output voltage and current for remote control.

Remote voltage indication: Lu pin terminal consists of 0 5V voltage and current indicative signal, can be externally connected with various number or pointer table.